- Add proper Bmon support to unpack + build digi events chain
- Add proper Much support to unpack + build digi events chain
- Add user parameter + flags to CbmDeviceUnpack to enable/disable the unpacking of each detector
- Add proper handling of disabled detectors in MQ transfer ib both CbmDeviceUnpack and CbmDeviceBuildDigiEvents
- Add parameter to set "MaxNb" type selection in CbmDeviceBuildDigiEvents
- Synchronize unpackers configuration in CbmDeviceUnpack with the one in the current `macro/run/run_unpack_tsa.C`
- Use fles::SubsystemIdentifier instead of hard coded values in CbmDeviceUnpack

- Add optional method to resort indicices to the CbmEvent class, as the indices for TRD1D and 2D are added in separate steps
- Replace the loop over the CbmEvent indices by a block copy between the first and last digi of each detector type, based
  on the assumption that we use a time-window based selection on a sorted array, therfore leading to a continuous block
  => this is known to potentially copy more digis in the TRD case due to the eventual =/= windows and offsets for 1D and 2D

- Make sure that Histo servers gets the right number of parts even if no histos/no canvases to configure or send
- Do not send STOP command after EOF in CbmMQTsSamplerRepReq
- Pre-book capacity in typical range for input vectors in DigiEventBuilder device

Administrator authored 2 years ago and Volker Friese committed 2 years ago

Remove many switches which are not needed any longer, since minimum versions
for C++ standard, Root, FairSoft and FairRoot are fixed.

Administrator authored 2 years ago and Florian Uhlig committed 2 years ago

The templated functions Deserialize and Serialize of the FairMQ Device are
marked deprecated. These templates acctually only forward the call to the
BoostSerializer and RootSerializer classes which are part of FairRoot.
Call these classes directly to remove deprectaion warnings.

Config class to align to the naming convention of Cbm and also decouple
FEE from read-out design

Use @VMCWORKDIR@ instaed which is exchanged by the acctual value while running
CMake. In case of $VMCWORKDIR/build uses @CMAKE_BINARY_DIR@.

When building the executables the needed PATH information to find necessary
libraries is stored in the executable. This PATH information is now also
present in the installed executables such that they work without adding PATH
information to the envirnonment.

The cleanup of the shared memory wasn't working anymore. The executable is
a part of FairMQ which was moved from FairRoot in its own package. Also the
name of the excutable has changed to fairmq-shmmonitor which is now installed
in SIMPATH.

Remove blank characters from the end of lines.

Create MQ startup scripts to be installed already at the configuration stage
and store the in the build tree. The difference between the scripts used in
the build tree and the scripts finally installed are the hardcoded directory
information inside. In the scripts to be used inside the build directory this
links to the source and the build directories whereas it links to the
installation directory in case of the scripts which are installed.
Copy the scripts during installation to the correct directory.
Install the MQ executables in the same directory structure as in the build
directory.

Fixed reference detector selection in CbmDeviceMcbmEventBuilderWin, CbmDeviceBuildRawEvents and CbmDeviceBuildDigiEvents.

Pierre-Alain Loizeau authored 3 years ago and Pierre-Alain Loizeau committed 3 years ago

In TOF unpacker, make the 2021 epoch hack controlable and disable it by default + enable in unpack macro for old runs

Pierre-Alain Loizeau authored 3 years ago and Pierre-Alain Loizeau committed 3 years ago

- In sim/steer, add CbmSetupStorable class in CbmSetup to convert back and forth from memory Instance to streamable object
- Add support for CbmSetup in MQ parameter server device, with CbmSetupStorable output upon request
- Change CbmSetup usage in MQ Unpack device from Disk access to parameter server request
- Add printout of the received tag in MQ unpack for each detector system

Pierre-Alain Loizeau authored 3 years ago and Pierre-Alain Loizeau committed 3 years ago

- Switch Sampler-Unpackers connection from Push-Pull to Rep-Req! lower sample memory usage and better load-balancing performances (first ready first served)!
- Use single channel for all histograms exchanges (objects but also configs)... to be cross-checked as some warnings
- In CbmMQTsSamplerRepReq, fix logic for emission of missing TS list when first missing is index 1
- In CbmMQTsSamplerRepReq, add case of missing TS 0 to same logic (starting processing after beginning of a run)
- In CbmMQTsSamplerRepReq, fix the stop execution when reaching max TS nb condition

Pierre-Alain Loizeau authored 3 years ago and Pierre-Alain Loizeau committed 3 years ago

- Add CbmDeviceDigiEventSink class and DigiEventSink binary
- In TsaMultiSampler, fix logic for emission of missing TS list when first missing is index 1
- Use vector ofCbmEvents instead of TClonesArray at output of BuildDigiEvents
- Add missing features file for Unpack-Build-Sink chain
- Add optional output of the full digi vectors in Event Sink

=> Tested with first file of run 1588, missing TS probably need better handling as too many empty fields

Pierre-Alain Loizeau authored 3 years ago and Pierre-Alain Loizeau committed 3 years ago

- Device using the central event builder algo in reco, with compatibility to output of the new unpack device
- Macro using these two new devices and setting the parameter files for the mCBM July 2021 data (optimized for run 1588)

Pierre-Alain Loizeau authored 3 years ago and Pierre-Alain Loizeau committed 3 years ago

- Split the InitUnpacker method of the UnpackConfig template into
  - InitOutput
  - RegisterOutput (Framework bound, to be replaced by method in Task class CbmRecoUnpack)
  - SetAlgo
  - initParContainer, moved to the Task Class CbmRecoUnpack
  - InitAlgo
- Move to the template version of these methods all blocks common to all derived config classes
- Whenever necessary, overload these methods in the derived config classes (including the common parts, no base method call)
- Bump Config classes version number
- Adapt the Sts Unpack algo classes to initialize the monitor classes
- Adapt the CbmRecoUnpack
- Adapt the CbmUnpackDevice to use the standard Unpack Config classes (compiles with full functionality but untested)

Administrator authored 3 years ago and Florian Uhlig committed 3 years ago

Remove wrong license header drom several files which came in by using a
template. The code was developed by the respective persons, the license header
came in by using a skeleton.

Florian Uhlig authored 3 years ago and Pierre-Alain Loizeau committed 3 years ago

Somehow (at least on some systems) the link order was such that the
first directory was $SIMPATH/lib. This was even the case when the order was
defined differently in the CMakeLists.txt. The problem isn't yet understood
completely.

This results in the problem that libVc.a was taken from $SIMPATH/lib
were it is installed by ROOT/FairSoft. As long as the version provided with
CbmRoot and the version provided by ROOT were the same the problem wasn't
seen. When updating our internal Vc version this results in a creash when
loading libryries due to a version mismatch between the library version and
the header file version.

Administrator authored 3 years ago and Florian Uhlig committed 3 years ago

Comment unused variables and data members.
Fix printf formating issue which is different between macosx and Linux.

A static const class member in a cout statement results in an undefined symbol
when linking an executable using the class.
The solution is to do a static cast of the variable in the cout statement.

Pierre-Alain Loizeau authored 3 years ago and Florian Uhlig committed 3 years ago

It was advised by the FariMQ expert to switch from a push-pull approach to a Rep-Req one.
This should improve the balance of TS delivery when they have non uniform size/processing time
and reduce the buffering in the Sample
- Add new sampler class CbmMQTsSamplerRepReq using the reply model
- Add example of a consummer device using the request model
- Add new monitor classes for T0 and TOF using the request model

Pierre-Alain Loizeau authored 3 years ago and Florian Uhlig committed 3 years ago

[FLES IPC] In Multi-part subscriber, move the init out of the constructor to follow FairMQ states design
- Temporary patch to fles IPC external files
- Corresponding modifications in CbmMQTsaMultiSampler
- Corresponding modifications in CbmMcbm2018Source

Pierre-Alain Loizeau authored 3 years ago and Florian Uhlig committed 3 years ago

- In CbmMqHistoServer, add a new method processing a multi-part message to combine Histo config, Canvas config and histo data
- Attach this new method to the histo data input channel
- Convert the T0 MQ monitor to this single channel usage
- Convert the Tof MQ monitor to this single channel usage