new mcbm setup created for High Rate Gold Runs of 18/06/22 to 20/06/2022 in...

new mcbm setup created for High Rate Gold Runs of 18/06/22 to 20/06/2022 in which GEMs are in acceptance.

setup/setup_mcbm_beam_2022_06_18_gold.C

+/** ROOT macro to define the CBM setup sis18_mcbm
+ **
+ ** @author Volker Friese <v.friese@gsi.de>
+ ** @author David Emschermann <d.emschermann@gsi.de>
+ ** @date   5 February 2016
+ **
+ **/
+
+// clang-format off
+
+// 2023-05-08 - VS - setup for High Rate Gold Runs 18/06/2022 to 20/06/2022.
+// 2022-11-23 - EC - remove buggy tof geo, replaced it
+// 2022-09-13 - DE - correct sensor overlap in y for STS ladder type 10
+// 2022-05-24 - DE - prepare setup for mCBM May 2022-05-23 nickel run
+// 2022-05-24 - DE - disable PSD to reduce secondaries (PSD is in parking position)
+// 2022-04-29 - DE - shift MUCH GEM to x = -5 cm
+// 2022-03-27 - DE - place the MUCH RPC behind the TOF stack, while GEMs are in the acceptance
+// 2022-03-27 - DE - place the MUCH RPC behind the TOF stack, while GEMs are out of acceptance
+// 2022-03-23 - DE - prepare setup for mCBM March 2022-03-22 iron run - tof_v21f
+// 2022-03-20 - DE - prepare setup for mCBM March 2022-03-20 iron run
+// 2022-03-09 - DE - prepare setup for mCBM March 2022-03-09 carbon run
+// 2022-02-04 - DE - surveyed position of STS v22c (7 cm downstream of nominal)
+// 2021-09-28 - DE - surveyed position of TRD v21b, TOF v21d and RICH v21a
+// 2020-08-17 - DE - add TRD v21a, add TOF v21c, disable MUCH v20a
+// 2020-05-26 - DE - use RICH v20d which moved according to TOF v20b
+// 2020-05-25 - DE - use TRD v20b with 2 modules and support frame for 2021
+// 2020-05-22 - DE - use platform v20a with measured size of support table
+// 2020-05-12 - DE - make mRICH v20b (without window) the new default
+// 2020-03-11 - DE - prepare setup for mCBM Spring 2021 beamtime
+// 2020-03-11 - DE - prepare setup for mCBM May 2020 beamtime
+// 2020-03-11 - DE - prepare setup for mCBM March 2020 beamtime
+// 2019-12-20 - FU - use the new pipe/targetbox geometry which consists of
+//                   root files which are both passed to to CbmSetup
+// 2019-11-28 - DE - move mTOF v19b +12 cm in x direction for the Nov 2019 run
+// 2019-11-15 - DE - use mSTS v19b with single module in the top left of station
+// 0 2019-08-15 - DE - use mCBM targetbox as pipe v19b 2019-08-12 - DE - use
+// mSTS v19a 2019-08-08 - FU - use mMUCH v19a 2019-08-02 - DE - use pipe v19a
+// with flange position at z=610 mm 2019-07-31 - DE - add TOF v18m=v19a geometry
+// - provided by the TOF group 2019-07-31 - DE - add RICH v19a geometry -
+// provided by the RICH group 2019-03-15 - DE - this is supposed to be the start
+// version of mCBM in March 2019 2018-08-24 - DE - this is supposed to be the
+// start version of mCBM in 2018 2018-06-27 - DE - set flipped mTOF v18j
+// geometry as new default 2018-05-24 - DE - place 20deg_long setup back at 25
+// degrees, see issue #1078 2018-02-27 - DE - use mTRD v18o to fix redmine issue
+// #1046 with tracking 2017-12-11 - DE - enable mBUCH v18m 2017-12-04 - DE - add
+// mPSD to mCBM setup 2017-11-22 - DE - use TRD v17n with 22 cm spacing from CAD
+// 2017-11-17 - DE - set aerogel mRICH v18d as default
+// 2017-11-10 - DE - switch to mMUCH v18e with Mv2 dimensions
+// 2017-11-03 - DE - add long setup, (acceptance matching +-12 degrees from
+// mSTS) 2017-11-02 - DE - add common support table v18c 2017-11-02 - DE -
+// include mBUCH with mTRD v18j 2017-10-23 - DE - use mMUCH with vertically
+// aligned left rim 2017-10-18 - DE - use mTOF v18h with vertical orientation
+// 2017-10-16 - DE - use 20 degree beampipe
+// 2017-06-03 - DE - add RICH v18a_mcbm
+// 2017-05-02 - DE - switch back to 5x5 RPC TOF
+// 2017-05-02 - DE - skip MVD in the initial setup
+// 2016-02-05 - VF - Replaces former sis18_mcbm_setup.C,
+//                   now using the CbmSetup class.
+// 2015-06-18 - DE - mCBM @ SIS18 setup
+
+void setup_mcbm_beam_2022_06_18_gold() {
+
+  // -----  Geometry Tags  --------------------------------------------------
+  TString platGeoTag = "v20a_mcbm"; // 2020 // support table
+
+  TString pipeGeoTag = "v19f_mcbm"; // pipe after target box
+
+  //  TString mvdGeoTag  = "v18b_mcbm";
+
+  // done
+  TString stsGeoTag  = "v22e_mcbm";
+
+  // done
+  TString muchGeoTag = "v22j_mcbm"; // 2 GEM layers in acceptance and 1 RPC behind TOF
+
+  // done
+  TString trdGeoTag  = "v22h_mcbm"; // TRD-2D May 2022 + 2x TRD-1D modules
+
+  // done
+  TString tofGeoTag  = "v21i_mcbm"; // same calibration parameters as v21g
+
+  // done
+  TString richGeoTag = "v21c_mcbm"; // othogonal to z-axis
+
+  // unchanged
+  //  TString psdGeoTag  = "v20a_mcbm"; // at 25 degree, below the beampipe
+  // ------------------------------------------------------------------------
+
+  // -----  Magnetic field  -------------------------------------------------
+  TString fieldTag    = "v18a";
+  Double_t fieldZ     = 40.; // field centre z position
+  Double_t fieldScale = 0.; // field scaling factor
+  // ------------------------------------------------------------------------
+
+  // -----  Create setup  ---------------------------------------------------
+  CbmSetup *setup = CbmSetup::Instance();
+  if (!setup->IsEmpty()) {
+    std::cout << "-W- setup_sis18_mcbm: overwriting existing setup"
+              << setup->GetTitle() << std::endl;
+    setup->Clear();
+  }
+  setup->SetTitle("SIS18 - mCBM Setup");
+  setup->SetModule(ECbmModuleId::kPlatform, platGeoTag);
+  setup->SetModule(ECbmModuleId::kPipe, pipeGeoTag);
+  //  setup->SetModule(ECbmModuleId::kMvd, mvdGeoTag);  // skip mvd
+  setup->SetModule(ECbmModuleId::kSts, stsGeoTag);
+  setup->SetModule(ECbmModuleId::kMuch, muchGeoTag);
+  setup->SetModule(ECbmModuleId::kTrd, trdGeoTag);
+  setup->SetModule(ECbmModuleId::kTof, tofGeoTag);
+  setup->SetModule(ECbmModuleId::kRich, richGeoTag);
+  //  setup->SetModule(ECbmModuleId::kPsd, psdGeoTag);
+  setup->SetField(fieldTag, fieldScale, 0., 0., fieldZ);
+  // ------------------------------------------------------------------------
+
+  // -----   Screen output   ------------------------------------------------
+  setup->Print();
+  // ------------------------------------------------------------------------
+}