Add example of monitoring using the influxDB monitoring library, with task unpacker

Refs #2844

• New option in RecoUnpack
• New queries creations if enabled
• Corresponding changes to CMake settings
• JSON file for one example Grafana dashboard
• HowTo file with installation and operation instructions

Attached one commit fixing a message flood in the Much unpacker

macro/run/grafana_models/HowTo_TimeSeriesMonitoring.md

+HowTo for tests on Monitoring with Timeseries database
+
+
+# Installation
+
+## InfluxDb
+
+1. Follow the instructions at https://docs.influxdata.com/influxdb/ \
+   In my case I used the `legacy` version `v1.8` for which the instructions are at
+   https://docs.influxdata.com/influxdb/v1.8/introduction/install/
+1. Tune the options in `/etc/influxdb/influxdb.conf` \
+   For example in my case I disabled the reporting of usage data to the developper and set the host address to
+   `127.0.0.1:8086` in order to restrict connections to the test server to local ones.
+   ```
+   reporting-disabled = true
+   [...]
+   [http]
+     bind-address = "127.0.0.1:8086"
+   ```
+1. Enable the InfluxDb service in the OS
+   ```
+   sudo -k systemctl enable --now influxdb
+   systemctl status influxdb
+   ```
+
+## Grafana
+
+1. Follow the instructions at https://grafana.com/docs/grafana/latest/setup-grafana/installation/
+1. Tune the options in `/etc/grafana/grafana.ini` \
+   For example in my case I set the host address to `127.0.0.1:3000` in order to restrict connections to the test server
+   to local ones.
+1. Enable the Grafana service in the OS
+   ```
+   sudo -k systemctl enable --now grafana-server.service
+   systemctl status grafana-server.service
+   ```
+
+## Cbmroot
+
+Nothing special to do, just normal compilation (and installation).
+
+# Initialization
+
+1. Create the target database in InfluxDb
+   ```
+   influx
+   > create database monitoring_tests
+   > quit
+   ```
+1. Enable the publishing of the monitoring data in the unpacking macro
+   ```
+   edit macro/run/run_unpack_tsa.C
+   > Uncomment line 486
+   ```
+1. Setup connection to InfluxDb in Grafana
+   1. Connect to `https://localhost:3000` in your favorite web browser (tested with Firefox >= 102)
+   1. Connect as `admin:admin` and set the new admin password when requested (only first connection)
+   1. Click on the three horizontal bars in the top left and then on `Connections > Connect Data`
+   1. In the search bar enter `InfluxDb` and select `InfluxDB` (not `Influx Admin`!)
+   1. Click on the new right button `create a InfluxDB data source` (blue if in Dark mode)
+   1. In URL, enter `http://127.0.0.1:8086`
+   1. Down in the page, in database enter `monitoring_tests`
+   1. Click on `Save and Test` at the bottom of the page
+1. Add the unpacker dashboard in Grafana
+   1. Click on the three horizontal bars in the top left and then on `Dashboards`
+   1. Click on the `New` button in the right (blue in Dark mode)
+   1. Click on `Import` in the new menu which rolled down
+   1. Select the file `macro/run/grafana_models/UnpackerPerfs.json`
+   1. Click on `Import` at the bottom of the page
+
+# Running and checking
+
+1. In a first console, just run the unpacker macro with the typical command, everything will happen in the background
+   ```
+   root -l -b -q 'run_unpack_tsa.C(<TSA file>, <RUN ID>, <"" or setup name if not standard>, <-1 or NB TS>)'
+   example > root -l -b -q 'run_unpack_tsa.C("/opt/cbm/beamtime-test-data/mcbm2022/2391_firstSpill.tsa",2391,"",-1)'
+   ```
+1. In a second console, check if the data arrive in the InfluxDB (this may take some time as entries are queued only
+   every `1 s` in  data time and published only every `10 s` in processing time)
+   ```
+   influx
+   > use monitoring_tests
+   > select * from unpack_perf
+   > select * from unpack_perf where "det" = "Bmon"
+   ```
+1. In you prefered web browser, connect to the grafana server and load the dashboard "Unpacker Performances"
+   1. Click on the three horizontal bars in the top left and select `Dashboards`
+   1. Click on the `General` folder in the center if it is not already expanded
+   1. Click on `Unpacker Performances`
+   1. Refresh the page to see more and more points appearing (for the 1st spill of mCBM run 2391, the unpacking time is
+      around `600-700 s`)