1. 08 Dec, 2021 6 commits
  2. 07 Dec, 2021 1 commit
  3. 06 Dec, 2021 1 commit
  4. 03 Dec, 2021 1 commit
    • Pierre-Alain Loizeau's avatar
      In STS unpacker, fix bug in handling of TS_MSB cycles happening at edge of MS + cleanup · 15c78e78
      Pierre-Alain Loizeau authored
      - Replace all legacy hard-coded numerical values for the TS_MSB cycle size by a constant derived in StsXyterMessage from the data format
      - Remove deprecated special cases in the handling of the TS_MSB messages which are not present anymore in the current CRI data format
      - Do not update TS_MSB and TS_MSB cycle from the MS header when the cycle happened exactly at the end of last MS
      - Recompute the TS+MSB in TS offset from the MS heder only when changing the Cycle or the TS_MSB from the same header
      - Add static method to convert Message Type into human readable string
      - Slight improve/cleanup of debug printouts and debug levels
      
      Was leading to errors and a crash in mCBM 2021 run 1588 files node8_3_0123 and node8_5_0002
      15c78e78
  5. 01 Dec, 2021 2 commits
  6. 30 Nov, 2021 2 commits
  7. 29 Nov, 2021 8 commits
  8. 26 Nov, 2021 3 commits
  9. 25 Nov, 2021 3 commits
    • Cornelius Feier-Riesen's avatar
      Correct weight values for signals · cc93ce5f
      Cornelius Feier-Riesen authored and Florian Uhlig's avatar Florian Uhlig committed
      cc93ce5f
    • Mehulkumar Shiroya's avatar
      STS geometry version v21[h-i] · 4dadea0e
      Mehulkumar Shiroya authored and Florian Uhlig's avatar Florian Uhlig committed
      STS v21h: The geometry has the target positioned at -4 cm. It can be used with the beampipe 40mm diameter upstream side
      and 104mm diameter downstream side. It has a beampipe flange on the back-side of the STS wall.
      In addition, the geometry has a sensor thickness 320 um which is similar thickness of the real silicon sensors purchased from the Hamamatsu Photonics
      for the use in the real experiment.
      Furthermore,the mico-cable is defined as a single volume attached to the silicon sensors. Micro-cable thickness (320 um) is choosen and
      the material Manganese is taken based on the calculation done by taking the current microcable design, thickness and its material.
      
      STS v21i: The geometry has the target positioned at -44 cm from the center of the magnet. It can be used with the beampipe 40mm diameter upstream side
      and 104mm diameter downstream side. It doesn't have a beam-pipe flange on the back-side of the wall.
      In addition, the geometry has a sensor thickness 320 um which is similar thickness of the real silicon sensors purchased from the Hamamatsu >
      for the use in the real experiment.
      Furthermore,the mico-cable is defined as a single volume attached to the silicon sensors. Micro-cable thickness (320 um) is choosen and
      the material Manganese is taken based on the calculation done by taking the current microcable design, thickness and its material.
      4dadea0e
    • Valentina Akishina's avatar
      b606f002
  10. 24 Nov, 2021 2 commits
  11. 23 Nov, 2021 3 commits
  12. 22 Nov, 2021 3 commits
    • Mehulkumar Shiroya's avatar
      STS geometries version v21f and v21g · d6be89bc
      Mehulkumar Shiroya authored
      v21f: STS geometry is similar to the version v21b. The target position considered from -4 cm.
      The geometry can be used with the beampipe with diameter 40 mm upstream side and 104 mm downstream side.
      The geometry has beampipe flange on the back-side of the wall.
      
      v21g: STS geometry is similar to the version v21e. The target position is at -40 cm considering global origin
      from the center of magnet. The STS local coordinate is from the last station.
      The geometry can be used with the beampipe with diameter 40 mm upstream side and 104 mm downstream side.
      
      In both geometry, the STS box and the beam pipe flange is made of Carbon fiber: The material has 70% carbon fiber with
      density 1.75 g/cm3 and epoxy resin (30%) with density 1.2 g/cm3. The material is defined in media.geo file as
      STS_CarbonFiber_21.
      d6be89bc
    • Mehulkumar Shiroya's avatar
      Corrects STS v21e geometry version · ff2564d2
      Mehulkumar Shiroya authored
      Change in tranformation from global origin (centre of magnet) to local origin of sts (last station) to a 59.5cm shift.
      Front face of sts from a target placed at 44cm is now 1.6 cm.
      ff2564d2
    • Volker Friese's avatar
      Integration of cbm::algo::EventBuilder in the FairRoot run/task framework,... · 6c0f6833
      Volker Friese authored and Florian Uhlig's avatar Florian Uhlig committed
      Integration of cbm::algo::EventBuilder in the FairRoot run/task framework, with the new task CbmTaskBuildEvents. Included into regular testing. Refs #2271.
      6c0f6833
  13. 21 Nov, 2021 2 commits
  14. 19 Nov, 2021 3 commits