diff --git a/macro/tof/mcbm/Create_TOF_Geometry_v24d_mcbm.C b/macro/tof/mcbm/Create_TOF_Geometry_v24d_mcbm.C
new file mode 100644
index 0000000000000000000000000000000000000000..0fb5386564c314cdedfd601388163068e123c242
--- /dev/null
+++ b/macro/tof/mcbm/Create_TOF_Geometry_v24d_mcbm.C
@@ -0,0 +1,1326 @@
+/* Copyright (C) 2024 GSI Helmholtzzentrum fuer Schwerionenforschung, Darmstadt
+ SPDX-License-Identifier: GPL-3.0-only
+ Authors: Florian Uhlig, Ingo Deppner [committer], A. Bercuci */
+
+///
+/// \file Create_TOF_Geometry_v24d_mcbm.C
+/// \brief Generates TOF geometry in Root format.
+///
+
+// Changelog
+// 2024-06-17 - v24d - AB - Fix Z position of odd and even RPCs in module type 0
+// 2024-04-30 - v24d - ID - Add 2nd downstream wall of TOF modules
+// 2024-03-26 - v24b - DE - Shifted in z to position measured in the cave
+// 2024-03-26 - v24a - DE - March 2024 setup by NH, script patched by DE in lines 1000 and 1004 to show only 2 STAR modules
+// 2021-11-17 - v24a - QZ - Modified v20d to fit the logic of digibdf.par
+// 2020-04-14 - v20b - NH - swapped double stack layer 2 with STAR2 moodule, buc kept as dummy
+// 2020-04-01 - v20a - NH - move mTOF +20 cm in x direction for the Mar 2020 run
+// 2019-11-28 - v19b - DE - move mTOF +12 cm in x direction for the Nov 2019 run
+// 2019-07-31 - v19a - DE - this TOF March 2019 geometry is also known as v18m
+// 2017-11-03 - v18i - DE - shift mTOF to z=298 cm for acceptance matching with mSTS
+// 2017-10-06 - v18h - DE - put v18f into vertical position to fit into the mCBM cave
+// 2017-07-15 - v18g - DE - swap the z-position of TOF modules: 2 in the front, 3 in the back
+// 2017-07-14 - v18f - DE - reduce vertical gap between TOF modules to fix the gap between modules 1-2 and 4-5
+// 2017-05-17 - v18e - DE - rotate electronics away from beam, shift 16 cm away from beam along x-axis
+// 2017-05-17 - v18d - DE - change geometry name to v18d
+
+// in root all sizes are given in cm
+
+#include "TFile.h"
+#include "TGeoCompositeShape.h"
+#include "TGeoManager.h"
+#include "TGeoMaterial.h"
+#include "TGeoMatrix.h"
+#include "TGeoMedium.h"
+#include "TGeoPgon.h"
+#include "TGeoVolume.h"
+#include "TList.h"
+#include "TMath.h"
+#include "TROOT.h"
+#include "TString.h"
+#include "TSystem.h"
+
+#include <iostream>
+
+// Name of geometry version and output file
+const TString geoVersion = "tof_v24d_mcbm"; // do not change
+const TString geoVersionStand = geoVersion + "Stand";
+//
+const TString fileTag = "tof_v24d";
+const TString FileNameSim = fileTag + "_mcbm.geo.root?reproducible";
+const TString FileNameGeo = fileTag + "_mcbm_geo.root?reproducible";
+const TString FileNameInfo = fileTag + "_mcbm.geo.info";
+
+// TOF_Z_Front corresponds to front cover of outer super module towers
+const Float_t TOF_Z_Front_Stand = 233.2; // = z=298 mCBM@SIS18
+const Float_t TOF_Y_Front_Stand = 0.;
+const Float_t TOF_X_Front_Stand = 0.;
+const Float_t TOF_Z_Front = 0;
+//const Float_t TOF_Z_Front = 130; // = z=225 mCBM@SIS18
+//const Float_t TOF_Z_Front = 250; // SIS 100 hadron
+//const Float_t TOF_Z_Front = 450; // SIS 100 hadron
+//const Float_t TOF_Z_Front = 600; // SIS 100 electron
+//const Float_t TOF_Z_Front = 650; // SIS 100 muon
+//const Float_t TOF_Z_Front = 880; // SIS 300 electron
+//const Float_t TOF_Z_Front = 1020; // SIS 300 muon
+//
+//const Float_t TOF_Z_Front = 951.5; // Wall_Z_Position = 1050 cm
+
+
+// Names of the different used materials which are used to build the modules
+// The materials are defined in the global media.geo file
+const TString KeepingVolumeMedium = "air";
+const TString BoxVolumeMedium = "aluminium";
+const TString NoActivGasMedium = "RPCgas_noact";
+const TString ActivGasMedium = "RPCgas";
+const TString GlasMedium = "RPCglass";
+const TString ElectronicsMedium = "carbon";
+
+// Counters:
+// 0 MRPC3a
+// 1 MRPC3b
+// 2 USTC
+// 3
+// 4 Diamond
+//
+// 6 Buc 2019
+// 7 CERN 20gap
+// 8 Ceramic Pad
+const Int_t NumberOfDifferentCounterTypes = 9;
+const Float_t Glass_X[NumberOfDifferentCounterTypes] = {32., 32., 32., 32., 0.2, 32., 28.8, 20., 2.4};
+const Float_t Glass_Y[NumberOfDifferentCounterTypes] = {27.0, 53., 26.8, 10., 0.2, 10., 6., 20., 2.4};
+const Float_t Glass_Z[NumberOfDifferentCounterTypes] = {0.1, 0.1, 0.1, 0.1, 0.01, 0.1, 0.1, 0.1, 0.1};
+
+const Float_t GasGap_X[NumberOfDifferentCounterTypes] = {32., 32., 32., 32., 0.2, 32., 28.8, 20., 2.4};
+const Float_t GasGap_Y[NumberOfDifferentCounterTypes] = {27.0, 53., 26.8, 10., 0.2, 10., 6., 20., 2.4};
+const Float_t GasGap_Z[NumberOfDifferentCounterTypes] = {0.025, 0.025, 0.025, 0.025, 0.01, 0.02, 0.02, 0.02, 0.025};
+
+const Int_t NumberOfGaps[NumberOfDifferentCounterTypes] = {8, 8, 8, 8, 1, 8, 10, 20, 4};
+//const Int_t NumberOfGaps[NumberOfDifferentCounterTypes] = {1,1,1,1}; //deb
+const Int_t NumberOfReadoutStrips[NumberOfDifferentCounterTypes] = {32, 32, 32, 32, 16, 32, 32, 20, 1};
+//const Int_t NumberOfReadoutStrips[NumberOfDifferentCounterTypes] = {1,1,1,1}; //deb
+
+const Float_t SingleStackStartPosition_Z[NumberOfDifferentCounterTypes] = {-0.6, -0.6, -0.6, -0.6, -0.1,
+ -0.6, -0.6, -0.6, -1.};
+
+const Float_t Electronics_X[NumberOfDifferentCounterTypes] = {32.0, 32.0, 32.0, 32., 0.3, 0.1, 28.8, 20., 0.1};
+const Float_t Electronics_Y[NumberOfDifferentCounterTypes] = {5.0, 5.0, 1.0, 1., 0.1, 0.1, 1.0, 1.0, 0.1};
+const Float_t Electronics_Z[NumberOfDifferentCounterTypes] = {0.3, 0.3, 0.3, 0.3, 0.1, 0.1, 0.1, 0.1, 0.1};
+
+const Int_t NofModuleTypes = 10;
+// 0 M4 (TSHU)
+// 1 M4 (USTC)
+// 2 M6 (USTC)
+// 5 Diamond
+// 6 Buc
+// 7 Testbox MRPC4
+// 8 Ceramic
+// 9 Star2
+// Aluminum box for all module types
+const Float_t Module_Size_X[NofModuleTypes] = {180., 180., 180., 180., 180., 5., 40., 100., 10., 100.};
+const Float_t Module_Size_Y[NofModuleTypes] = {49., 49., 74., 28., 18., 5., 15., 49., 10., 49.};
+const Float_t Module_Over_Y[NofModuleTypes] = {11.5, 11.5, 11., 4.5, 4.5, 0., 0., 0., 0., 0.};
+const Float_t Module_Size_Z[NofModuleTypes] = {11., 11., 13., 11., 11., 1., 14.5, 11., 1., 11.2};
+const Float_t Module_Thick_Alu_X_left = 0.1;
+const Float_t Module_Thick_Alu_X_right = 1.0;
+const Float_t Module_Thick_Alu_Y = 0.1;
+const Float_t Module_Thick_Alu_Z = 0.1;
+
+// Distance to the center of the TOF wall [cm];
+const Float_t Wall_Z_Position = 400.;
+const Float_t MeanTheta = 0.;
+
+//Type of Counter for module
+const Int_t CounterTypeInModule[NofModuleTypes] = {0, 0, 1, 2, 3, 4, 6, 7, 8, 0};
+const Int_t NCounterInModule[NofModuleTypes] = {5, 5, 5, 5, 5, 1, 2, 1, 8, 2};
+
+// Placement of the counter inside the module
+const Float_t CounterXStartPosition[NofModuleTypes] = {-60.0, -66.0, -61.1, -60.0, -60.0, 0.0, 0., 0., 0., 0.};
+const Float_t CounterXDistance[NofModuleTypes] = { 30.0, 32.0, 30.45, 30.0, 30.0, 0.0, 0., 0., 0., 0.};
+const Float_t CounterYStartPosition[NofModuleTypes] = { 0.0, 0.0, 0.0, 0.0, 0.0, 0., 0., 0., 0., 0.};
+const Float_t CounterYDistance[NofModuleTypes] = { 0.0, 0.0, 0.0, 0.0, 0.0, 0., 0., 0., 0., 0.};
+const Float_t CounterZDistance[NofModuleTypes] = { -2.25, 0.0, 0.0, 2.5, 2.5, 0., 3.8, 4., 0.1, 4.3};
+const Float_t CounterZStartPosition[NofModuleTypes] = { 3.3, 0.0, 0.0, 0.0, 0.0, 0., -1.9, -2., 0.0,-2.2};
+const Float_t CounterRotationAngle[NofModuleTypes] = { 0., 8.7, -10.0, 0., 0., 0., 0., 0., 0., 0.};
+const Float_t CounterRotationAngleZ[NofModuleTypes] = { 0., 0., 0.0, 0., 0., 0., 0., 90., 0., 0.};
+// clang-format on
+
+// Pole (support structure)
+const Int_t MaxNumberOfPoles = 20;
+Float_t Pole_ZPos[MaxNumberOfPoles];
+Float_t Pole_Col[MaxNumberOfPoles];
+Int_t NumberOfPoles = 0;
+
+const Float_t Pole_Size_X = 20.;
+const Float_t Pole_Size_Y = 300.;
+const Float_t Pole_Size_Z = 10.;
+const Float_t Pole_Thick_X = 5.;
+const Float_t Pole_Thick_Y = 5.;
+const Float_t Pole_Thick_Z = 5.;
+
+// Bars (support structure)
+const Float_t Bar_Size_X = 20.;
+const Float_t Bar_Size_Y = 20.;
+Float_t Bar_Size_Z = 100.;
+
+const Int_t MaxNumberOfBars = 20;
+Float_t Bar_ZPos[MaxNumberOfBars];
+Float_t Bar_XPos[MaxNumberOfBars];
+Int_t NumberOfBars = 0;
+
+const Float_t ChamberOverlap = 40;
+const Float_t DxColl = 158.0; //Module_Size_X-ChamberOverlap;
+//const Float_t Pole_Offset=Module_Size_X/2.+Pole_Size_X/2.;
+const Float_t Pole_Offset = 90.0 + Pole_Size_X / 2.;
+
+// Position for module placement
+const Float_t Inner_Module_First_Y_Position = 16.;
+const Float_t Inner_Module_Last_Y_Position = 480.;
+const Float_t Inner_Module_X_Offset = 0.; // centered position in x/y
+//const Float_t Inner_Module_X_Offset=18; // shift by 16 cm in x
+const Int_t Inner_Module_NTypes = 3;
+const Float_t Inner_Module_Types[Inner_Module_NTypes] = {4., 3., 0.};
+//const Float_t Inner_Module_Number[Inner_Module_NTypes] = {2.,2.,6.}; //V13_3a
+const Float_t Inner_Module_Number[Inner_Module_NTypes] = {2., 2., 1.}; //V13_3a
+//const Float_t Inner_Module_Number[Inner_Module_NTypes] = {0.,0.,0.}; //debugging
+
+const Float_t InnerSide_Module_X_Offset = 51.;
+const Float_t InnerSide_Module_NTypes = 1;
+const Float_t InnerSide_Module_Types[Inner_Module_NTypes] = {5.};
+const Float_t InnerSide_Module_Number[Inner_Module_NTypes] = {2.}; //v13_3a
+//const Float_t InnerSide_Module_Number[Inner_Module_NTypes] = {0.}; //debug
+
+const Float_t Outer_Module_First_Y_Position = 0.;
+const Float_t Outer_Module_Last_Y_Position = 480.;
+const Float_t Outer_Module_X_Offset = 3.;
+const Int_t Outer_Module_Col = 4;
+const Int_t Outer_Module_NTypes = 2;
+const Float_t Outer_Module_Types[Outer_Module_NTypes][Outer_Module_Col] = {1., 1., 1., 1., 2., 2., 2., 2.};
+const Float_t Outer_Module_Number[Outer_Module_NTypes][Outer_Module_Col] = {9., 9., 2., 0., 0., 0., 3., 4.}; //V13_3a
+//const Float_t Outer_Module_Number[Outer_Module_NTypes][Outer_Module_Col] = {1.,1.,0.,0., 0.,0.,0.,0.};//debug
+
+const Float_t Star2_First_Z_Position = TOF_Z_Front + 36.;
+const Float_t Star2_Delta_Z_Position = 16.;
+const Float_t Star2_First_Y_Position = -1.3; //
+const Float_t Star2_Delta_Y_Position = 0.; //
+const Int_t Star2_NTypes = 2;
+const Float_t Star2_rotate_Z[Star2_NTypes] = {90.,90};
+const Float_t Star2_Types[Star2_NTypes] = {9.,9};
+const Float_t Star2_Number[Star2_NTypes] = {1.,1.}; //debugging, V16b
+const Float_t Star2_X_Offset[Star2_NTypes] = {-15.,-15.0}; //{62.};
+
+const Float_t Buc_First_Z_Position = TOF_Z_Front + 34.75;
+const Float_t Buc_Delta_Z_Position = 0.;
+const Float_t Buc_First_Y_Position = 33.5; //
+const Float_t Buc_Delta_Y_Position = 0.; //
+const Float_t Buc_rotate_Z = 180.;
+const Float_t Buc_rotate_Y = 0.;
+const Int_t Buc_NTypes = 1;
+const Float_t Buc_Types[Buc_NTypes] = {6.};
+const Float_t Buc_Number[Buc_NTypes] = {1.}; //debugging, V16b
+const Float_t Buc_X_Offset[Buc_NTypes] = {32.};
+
+const Int_t Cer_NTypes = 3;
+const Float_t Cer_Z_Position[Cer_NTypes] = {(float) (TOF_Z_Front + 13.2), (float) (TOF_Z_Front + 45.),
+ (float) (TOF_Z_Front + 45.)};
+const Float_t Cer_X_Position[Cer_NTypes] = {0., 49.8, 49.8};
+const Float_t Cer_Y_Position[Cer_NTypes] = {-1., 5., 5.};
+const Float_t Cer_rotate_Z[Cer_NTypes] = {0., 0., 0.};
+const Float_t Cer_Types[Cer_NTypes] = {5., 8., 8.};
+const Float_t Cer_Number[Cer_NTypes] = {1., 1., 1.}; //V16b
+
+
+const Float_t Testbox_MRPC4_Z_Position = TOF_Z_Front + 15.9; //
+const Float_t Testbox_MRPC4_First_Y_Position = 32.70;
+const Float_t Testbox_MRPC4_X_Offset = 50.17; //65.5;
+const Float_t Testbox_MRPC4_rotate_Z = -90.;
+const Int_t Testbox_MRPC4_NTypes = 1;
+const Float_t Testbox_MRPC4_Types[Testbox_MRPC4_NTypes] = {7.}; // this is the SmType!
+const Float_t Testbox_MRPC4_Number[Testbox_MRPC4_NTypes] = {1.}; // evtl. double for split signals
+
+// some global variables
+TGeoManager* gGeoMan = NULL; // Pointer to TGeoManager instance
+TGeoVolume* gModules[NofModuleTypes]; // Global storage for module types
+TGeoVolume* gCounter[NumberOfDifferentCounterTypes];
+TGeoVolume* gPole;
+TGeoVolume* gBar[MaxNumberOfBars];
+
+const Float_t Dia_Z_Position = -0.5 - TOF_Z_Front_Stand;
+const Float_t Dia_First_Y_Position = 0.;
+const Float_t Dia_X_Offset = 0.;
+const Float_t Dia_rotate_Z = 0.;
+const Int_t Dia_NTypes = 1;
+const Float_t Dia_Types[Dia_NTypes] = {5.};
+const Float_t Dia_Number[Dia_NTypes] = {1.};
+
+Float_t Last_Size_Y = 0.;
+Float_t Last_Over_Y = 0.;
+
+// Forward declarations
+void create_materials_from_media_file();
+TGeoVolume* create_counter(Int_t);
+TGeoVolume* create_new_counter(Int_t);
+TGeoVolume* create_tof_module(Int_t);
+TGeoVolume* create_new_tof_module(Int_t);
+TGeoVolume* create_tof_pole();
+TGeoVolume* create_tof_bar();
+void position_tof_poles(Int_t);
+void position_tof_bars(Int_t);
+void position_inner_tof_modules(Int_t);
+void position_side_tof_modules(Int_t);
+void position_outer_tof_modules(Int_t);
+void position_Dia(Int_t);
+void position_Star2(Int_t);
+void position_Buc(Int_t);
+void position_cer_modules(Int_t);
+void position_Testbox_MRPC4(Int_t);
+void dump_info_file();
+
+
+void Create_TOF_Geometry_v24d_mcbm()
+{
+
+ // Load needed material definition from media.geo file
+ create_materials_from_media_file();
+
+ // Get the GeoManager for later usage
+ gGeoMan = (TGeoManager*) gROOT->FindObject("FAIRGeom");
+ gGeoMan->SetVisLevel(5); // 2 = super modules
+ gGeoMan->SetVisOption(0);
+
+ // Create the top volume
+ /*
+ TGeoBBox* topbox= new TGeoBBox("", 1000., 1000., 1000.);
+ TGeoVolume* top = new TGeoVolume("top", topbox, gGeoMan->GetMedium("air"));
+ gGeoMan->SetTopVolume(top);
+ */
+
+ TGeoVolume* top = new TGeoVolumeAssembly("TOP");
+ gGeoMan->SetTopVolume(top);
+
+ TGeoRotation* tof_rotation = new TGeoRotation();
+ tof_rotation->RotateY(0.); // angle with respect to beam axis
+ //tof_rotation->RotateZ( 0 ); // electronics on 9 o'clock position = +x
+ // tof_rotation->RotateZ( 0 ); // electronics on 9 o'clock position = +x
+ // tof_rotation->RotateZ( 90 ); // electronics on 12 o'clock position (top)
+ // tof_rotation->RotateZ( 180 ); // electronics on 3 o'clock position = -x
+ // tof_rotation->RotateZ( 270 ); // electronics on 6 o'clock position (bottom)
+
+ TGeoVolume* tof = new TGeoVolumeAssembly(geoVersion);
+ // top->AddNode(tof, 1, tof_rotation);
+ top->AddNode(tof, 1);
+
+ TGeoVolume* tofstand = new TGeoVolumeAssembly(geoVersionStand);
+ // Mar 2020 run
+ TGeoTranslation* stand_trans_local = new TGeoTranslation("", TOF_X_Front_Stand, TOF_Y_Front_Stand, 0.);
+ TGeoTranslation* stand_trans = new TGeoTranslation("", 0., 0., TOF_Z_Front_Stand);
+ TGeoCombiTrans* stand_combi_trans = new TGeoCombiTrans(*stand_trans, *tof_rotation);
+
+ TGeoRotation* stand_rot = new TGeoRotation();
+ stand_rot->RotateY(0.);
+ //stand_rot->RotateY(0.97);
+ TGeoCombiTrans* stand_combi_trans_local = new TGeoCombiTrans(*stand_trans_local, *stand_rot);
+
+ //tof->AddNode(tofstand, 1, stand_combi_trans);
+ tof->AddNode(tofstand, 1, stand_combi_trans_local);
+ //tof->AddNode(tofstand, 1);
+
+ for (Int_t counterType = 0; counterType < NumberOfDifferentCounterTypes; counterType++) {
+ gCounter[counterType] = create_new_counter(counterType);
+ }
+
+ for (Int_t moduleType = 0; moduleType < NofModuleTypes; moduleType++) {
+ gModules[moduleType] = create_new_tof_module(moduleType);
+ gModules[moduleType]->SetVisContainers(1);
+ }
+
+ // no pole
+ // gPole = create_tof_pole();
+
+ // position_side_tof_modules(1); // keep order !!
+ // position_inner_tof_modules(2);
+ position_inner_tof_modules(1);
+ position_Dia(1);
+ position_Star2(2);
+ // position_cer_modules(3);
+ // position_CERN(1);
+ position_Buc(1);
+
+ cout << "Outer Types " << Outer_Module_Types[0][0] << ", " << Outer_Module_Types[1][0]
+ << ", col=1: " << Outer_Module_Types[0][1] << ", " << Outer_Module_Types[1][1] << endl;
+ cout << "Outer Number " << Outer_Module_Number[0][0] << ", " << Outer_Module_Number[1][0]
+ << ", col=1: " << Outer_Module_Number[0][1] << ", " << Outer_Module_Number[1][1] << endl;
+ // position_outer_tof_modules(4);
+ // position_tof_poles(0);
+ // position_tof_bars(0);
+
+ gGeoMan->CloseGeometry();
+ gGeoMan->CheckOverlaps(0.001);
+ gGeoMan->PrintOverlaps();
+ gGeoMan->CheckOverlaps(0.001, "s");
+ gGeoMan->PrintOverlaps();
+ gGeoMan->Test();
+
+ tof->Export(FileNameSim);
+ TFile* geoFile = new TFile(FileNameSim, "UPDATE");
+ stand_combi_trans->Write();
+ geoFile->Close();
+
+ /*
+ TFile* outfile1 = new TFile(FileNameSim,"RECREATE");
+ top->Write();
+ //gGeoMan->Write();
+ outfile1->Close();
+*/
+ TFile* outfile2 = new TFile(FileNameGeo, "RECREATE");
+ gGeoMan->Write();
+ outfile2->Close();
+
+ dump_info_file();
+
+ top->SetVisContainers(1);
+ gGeoMan->SetVisLevel(5);
+ top->Draw("ogl");
+ //top->Draw();
+ //gModules[0]->Draw("ogl");
+ // gModules[0]->Draw("");
+ gModules[0]->SetVisContainers(1);
+ // gModules[1]->Draw("");
+ gModules[1]->SetVisContainers(1);
+ //gModules[5]->Draw("");
+ // top->Raytrace();
+}
+
+void create_materials_from_media_file()
+{
+ // Use the FairRoot geometry interface to load the media which are already defined
+ FairGeoLoader* geoLoad = new FairGeoLoader("TGeo", "FairGeoLoader");
+ FairGeoInterface* geoFace = geoLoad->getGeoInterface();
+ TString geoPath = gSystem->Getenv("VMCWORKDIR");
+ TString geoFile = geoPath + "/geometry/media.geo";
+ geoFace->setMediaFile(geoFile);
+ geoFace->readMedia();
+
+ // Read the required media and create them in the GeoManager
+ FairGeoMedia* geoMedia = geoFace->getMedia();
+ FairGeoBuilder* geoBuild = geoLoad->getGeoBuilder();
+
+ FairGeoMedium* air = geoMedia->getMedium("air");
+ FairGeoMedium* aluminium = geoMedia->getMedium("aluminium");
+ FairGeoMedium* RPCgas = geoMedia->getMedium("RPCgas");
+ FairGeoMedium* RPCgas_noact = geoMedia->getMedium("RPCgas_noact");
+ FairGeoMedium* RPCglass = geoMedia->getMedium("RPCglass");
+ FairGeoMedium* carbon = geoMedia->getMedium("carbon");
+
+ // include check if all media are found
+
+ geoBuild->createMedium(air);
+ geoBuild->createMedium(aluminium);
+ geoBuild->createMedium(RPCgas);
+ geoBuild->createMedium(RPCgas_noact);
+ geoBuild->createMedium(RPCglass);
+ geoBuild->createMedium(carbon);
+}
+
+TGeoVolume* create_counter(Int_t modType)
+{
+
+ //glass
+ Float_t gdx = Glass_X[modType];
+ Float_t gdy = Glass_Y[modType];
+ Float_t gdz = Glass_Z[modType];
+
+ //gas gap
+ Int_t nstrips = NumberOfReadoutStrips[modType];
+ Int_t ngaps = NumberOfGaps[modType];
+
+
+ Float_t ggdx = GasGap_X[modType];
+ Float_t ggdy = GasGap_Y[modType];
+ Float_t ggdz = GasGap_Z[modType];
+ Float_t gsdx = ggdx / float(nstrips);
+
+ //single stack
+ Float_t dzpos = gdz + ggdz;
+ Float_t startzpos = SingleStackStartPosition_Z[modType];
+
+ // electronics
+ //pcb dimensions
+ Float_t dxe = Electronics_X[modType];
+ Float_t dye = Electronics_Y[modType];
+ Float_t dze = Electronics_Z[modType];
+ Float_t yele = (gdy + 0.1) / 2. + dye / 2.;
+
+ // needed materials
+ TGeoMedium* glassPlateVolMed = gGeoMan->GetMedium(GlasMedium);
+ TGeoMedium* noActiveGasVolMed = gGeoMan->GetMedium(NoActivGasMedium);
+ TGeoMedium* activeGasVolMed = gGeoMan->GetMedium(ActivGasMedium);
+ TGeoMedium* electronicsVolMed = gGeoMan->GetMedium(ElectronicsMedium);
+
+ // Single glass plate
+ TGeoBBox* glass_plate = new TGeoBBox("", gdx / 2., gdy / 2., gdz / 2.);
+ TGeoVolume* glass_plate_vol = new TGeoVolume("tof_glass", glass_plate, glassPlateVolMed);
+ glass_plate_vol->SetLineColor(kMagenta); // set line color for the glass plate
+ glass_plate_vol->SetTransparency(20); // set transparency for the TOF
+ TGeoTranslation* glass_plate_trans = new TGeoTranslation("", 0., 0., 0.);
+
+ // Single gas gap
+ TGeoBBox* gas_gap = new TGeoBBox("", ggdx / 2., ggdy / 2., ggdz / 2.);
+ //TGeoVolume* gas_gap_vol =
+ //new TGeoVolume("tof_gas_gap", gas_gap, noActiveGasVolMed);
+ TGeoVolume* gas_gap_vol = new TGeoVolume("tof_gas_active", gas_gap, activeGasVolMed);
+ gas_gap_vol->Divide("Strip", 1, nstrips, -ggdx / 2., 0);
+
+ gas_gap_vol->SetLineColor(kRed); // set line color for the gas gap
+ gas_gap_vol->SetTransparency(70); // set transparency for the TOF
+ TGeoTranslation* gas_gap_trans = new TGeoTranslation("", 0., 0., (gdz + ggdz) / 2.);
+
+
+ // Single subdivided active gas gap
+ /*
+ TGeoBBox* gas_active = new TGeoBBox("", gsdx/2., ggdy/2., ggdz/2.);
+ TGeoVolume* gas_active_vol =
+ new TGeoVolume("tof_gas_active", gas_active, activeGasVolMed);
+ gas_active_vol->SetLineColor(kBlack); // set line color for the gas gap
+ gas_active_vol->SetTransparency(70); // set transparency for the TOF
+ */
+
+ // Add glass plate, inactive gas gap and active gas gaps to a single stack
+ TGeoVolume* single_stack = new TGeoVolumeAssembly("single_stack");
+ single_stack->AddNode(glass_plate_vol, 0, glass_plate_trans);
+ single_stack->AddNode(gas_gap_vol, 0, gas_gap_trans);
+
+ /*
+ for (Int_t l=0; l<nstrips; l++){
+ TGeoTranslation* gas_active_trans
+ = new TGeoTranslation("", -ggdx/2+(l+0.5)*gsdx, 0., 0.);
+ gas_gap_vol->AddNode(gas_active_vol, l, gas_active_trans);
+ // single_stack->AddNode(gas_active_vol, l, gas_active_trans);
+ }
+ */
+
+ // Add 8 single stacks + one glass plate at the e09.750nd to a multi stack
+ TGeoVolume* multi_stack = new TGeoVolumeAssembly("multi_stack");
+ Int_t l;
+ for (l = 0; l < ngaps; l++) {
+ TGeoTranslation* single_stack_trans = new TGeoTranslation("", 0., 0., startzpos + l * dzpos);
+ multi_stack->AddNode(single_stack, l, single_stack_trans);
+ }
+ TGeoTranslation* single_glass_back_trans = new TGeoTranslation("", 0., 0., startzpos + ngaps * dzpos);
+ multi_stack->AddNode(glass_plate_vol, l, single_glass_back_trans);
+
+ // Add electronics above and below the glass stack to build a complete counter
+ TGeoVolume* counter = new TGeoVolumeAssembly("counter");
+ TGeoTranslation* multi_stack_trans = new TGeoTranslation("", 0., 0., 0.);
+ counter->AddNode(multi_stack, l, multi_stack_trans);
+
+ TGeoBBox* pcb = new TGeoBBox("", dxe / 2., dye / 2., dze / 2.);
+ TGeoVolume* pcb_vol = new TGeoVolume("pcb", pcb, electronicsVolMed);
+ pcb_vol->SetLineColor(kCyan); // set line color for the gas gap
+ pcb_vol->SetTransparency(10); // set transparency for the TOF
+ for (Int_t l = 0; l < 2; l++) {
+ yele *= -1.;
+ TGeoTranslation* pcb_trans = new TGeoTranslation("", 0., yele, 0.);
+ counter->AddNode(pcb_vol, l, pcb_trans);
+ }
+
+ return counter;
+}
+
+TGeoVolume* create_new_counter(Int_t modType)
+{
+
+ //glass
+ Float_t gdx = Glass_X[modType];
+ Float_t gdy = Glass_Y[modType];
+ Float_t gdz = Glass_Z[modType];
+
+ //gas gap
+ Int_t nstrips = NumberOfReadoutStrips[modType];
+ Int_t ngaps = NumberOfGaps[modType];
+
+
+ Float_t ggdx = GasGap_X[modType];
+ Float_t ggdy = GasGap_Y[modType];
+ Float_t ggdz = GasGap_Z[modType];
+ Float_t gsdx = ggdx / (Float_t)(nstrips);
+
+ // electronics
+ //pcb dimensions
+ Float_t dxe = Electronics_X[modType];
+ Float_t dye = Electronics_Y[modType];
+ Float_t dze = Electronics_Z[modType];
+ Float_t yele = gdy / 2. + dye / 2.;
+
+ // counter size (calculate from glas, gap and electronics sizes)
+ Float_t cdx = TMath::Max(gdx, ggdx);
+ cdx = TMath::Max(cdx, dxe) + 0.2;
+ Float_t cdy = TMath::Max(gdy, ggdy) + 2 * dye + 0.2;
+ Float_t cdz = ngaps * ggdz + (ngaps + 1) * gdz + 0.2; // ngaps * (gdz+ggdz) + gdz + 0.2; // ok
+
+ //calculate thickness and first position in counter of single stack
+ Float_t dzpos = gdz + ggdz;
+ Float_t startzposglas = -ngaps * (gdz + ggdz) / 2.; // -cdz/2.+0.1+gdz/2.; // ok // (-cdz+gdz)/2.; // not ok
+ Float_t startzposgas = startzposglas + gdz / 2. + ggdz / 2.; // -cdz/2.+0.1+gdz +ggdz/2.; // ok
+
+
+ // needed materials
+ TGeoMedium* glassPlateVolMed = gGeoMan->GetMedium(GlasMedium);
+ TGeoMedium* noActiveGasVolMed = gGeoMan->GetMedium(NoActivGasMedium);
+ TGeoMedium* activeGasVolMed = gGeoMan->GetMedium(ActivGasMedium);
+ TGeoMedium* electronicsVolMed = gGeoMan->GetMedium(ElectronicsMedium);
+
+
+ // define counter volume
+ TGeoBBox* counter_box = new TGeoBBox("", cdx / 2., cdy / 2., cdz / 2.);
+ TGeoVolume* counter = new TGeoVolume("counter", counter_box, noActiveGasVolMed);
+ counter->SetLineColor(kRed); // set line color for the counter
+ counter->SetTransparency(70); // set transparency for the TOF
+
+ // define single glass plate volume
+ TGeoBBox* glass_plate = new TGeoBBox("", gdx / 2., gdy / 2., gdz / 2.);
+ TGeoVolume* glass_plate_vol = new TGeoVolume("tof_glass", glass_plate, glassPlateVolMed);
+ glass_plate_vol->SetLineColor(kMagenta); // set line color for the glass plate
+ glass_plate_vol->SetTransparency(20); // set transparency for the TOF
+ // define single gas gap volume
+ TGeoBBox* gas_gap = new TGeoBBox("", ggdx / 2., ggdy / 2., ggdz / 2.);
+ TGeoVolume* gas_gap_vol = new TGeoVolume("Gap", gas_gap, activeGasVolMed);
+ gas_gap_vol->Divide("Cell", 1, nstrips, -ggdx / 2., 0);
+ gas_gap_vol->SetLineColor(kRed); // set line color for the gas gap
+ gas_gap_vol->SetTransparency(99); // set transparency for the TOF
+
+ // place 8 gas gaps and 9 glas plates in the counter
+ for (Int_t igap = 0; igap <= ngaps; igap++) {
+ // place (ngaps+1) glass plates
+ Float_t zpos_glas = startzposglas + igap * dzpos;
+ TGeoTranslation* glass_plate_trans = new TGeoTranslation("", 0., 0., zpos_glas);
+ counter->AddNode(glass_plate_vol, igap, glass_plate_trans);
+ // place ngaps gas gaps
+ if (igap < ngaps) {
+ Float_t zpos_gas = startzposgas + igap * dzpos;
+ TGeoTranslation* gas_gap_trans = new TGeoTranslation("", 0., 0., zpos_gas);
+ counter->AddNode(gas_gap_vol, igap, gas_gap_trans);
+ }
+ // cout <<"Zpos(Glas): "<< zpos_glas << endl;
+ // cout <<"Zpos(Gas): "<< zpos_gas << endl;
+ }
+
+ // create and place the electronics above and below the glas stack
+ TGeoBBox* pcb = new TGeoBBox("", dxe / 2., dye / 2., dze / 2.);
+ TGeoVolume* pcb_vol = new TGeoVolume("pcb", pcb, electronicsVolMed);
+ pcb_vol->SetLineColor(kYellow); // kCyan); // set line color for electronics
+ pcb_vol->SetTransparency(10); // set transparency for the TOF
+ for (Int_t l = 0; l < 2; l++) {
+ yele *= -1.;
+ TGeoTranslation* pcb_trans = new TGeoTranslation("", 0., yele, 0.);
+ counter->AddNode(pcb_vol, l, pcb_trans);
+ }
+
+
+ return counter;
+}
+
+TGeoVolume* create_tof_module(Int_t modType)
+{
+ Int_t cType = CounterTypeInModule[modType];
+ Float_t dx = Module_Size_X[modType];
+ Float_t dy = Module_Size_Y[modType];
+ Float_t dz = Module_Size_Z[modType];
+ Float_t width_aluxl = Module_Thick_Alu_X_left;
+ Float_t width_aluxr = Module_Thick_Alu_X_right;
+ Float_t width_aluy = Module_Thick_Alu_Y;
+ Float_t width_aluz = Module_Thick_Alu_Z;
+
+ Float_t shift_gas_box = (Module_Thick_Alu_X_right - Module_Thick_Alu_X_left) / 2;
+
+ Float_t dxpos = CounterXDistance[modType];
+ Float_t startxpos = CounterXStartPosition[modType];
+ Float_t dzoff = CounterZDistance[modType];
+ Float_t rotangle = CounterRotationAngle[modType];
+
+ TGeoMedium* boxVolMed = gGeoMan->GetMedium(BoxVolumeMedium);
+ TGeoMedium* noActiveGasVolMed = gGeoMan->GetMedium(NoActivGasMedium);
+
+ TString moduleName = Form("module_%d", modType);
+ TGeoVolume* module = new TGeoVolumeAssembly(moduleName);
+
+ TGeoBBox* alu_box = new TGeoBBox("", dx / 2., dy / 2., dz / 2.);
+ TGeoVolume* alu_box_vol = new TGeoVolume("alu_box", alu_box, boxVolMed);
+ alu_box_vol->SetLineColor(kGreen); // set line color for the alu box
+ alu_box_vol->SetTransparency(20); // set transparency for the TOF
+ TGeoTranslation* alu_box_trans = new TGeoTranslation("", 0., 0., 0.);
+ module->AddNode(alu_box_vol, 0, alu_box_trans);
+
+ TGeoBBox* gas_box =
+ new TGeoBBox("", (dx - (width_aluxl + width_aluxr)) / 2., (dy - 2 * width_aluy) / 2., (dz - 2 * width_aluz) / 2.);
+ TGeoVolume* gas_box_vol = new TGeoVolume("gas_box", gas_box, noActiveGasVolMed);
+ gas_box_vol->SetLineColor(kYellow); // set line color for the gas box
+ gas_box_vol->SetTransparency(70); // set transparency for the TOF
+ TGeoTranslation* gas_box_trans = new TGeoTranslation("", shift_gas_box, 0., 0.);
+ alu_box_vol->AddNode(gas_box_vol, 0, gas_box_trans);
+
+ for (Int_t j = 0; j < 5; j++) { //loop over counters (modules)
+ Float_t zpos;
+ if (0 == modType) { zpos = dzoff *= -1; }
+ else {
+ zpos = 0.;
+ }
+ //cout << "counter z position " << zpos << endl;
+ TGeoTranslation* counter_trans = new TGeoTranslation("", startxpos + j * dxpos, 0.0, zpos);
+
+ TGeoRotation* counter_rot = new TGeoRotation();
+ counter_rot->RotateY(rotangle);
+ TGeoCombiTrans* counter_combi_trans = new TGeoCombiTrans(*counter_trans, *counter_rot);
+ gas_box_vol->AddNode(gCounter[cType], j, counter_combi_trans);
+ }
+
+ return module;
+}
+
+TGeoVolume* create_new_tof_module(Int_t modType)
+{
+ Int_t cType = CounterTypeInModule[modType];
+ Float_t dx = Module_Size_X[modType];
+ Float_t dy = Module_Size_Y[modType];
+ Float_t dz = Module_Size_Z[modType];
+ Float_t width_aluxl = Module_Thick_Alu_X_left;
+ Float_t width_aluxr = Module_Thick_Alu_X_right;
+ Float_t width_aluy = Module_Thick_Alu_Y;
+ Float_t width_aluz = Module_Thick_Alu_Z;
+
+ Float_t shift_gas_box = (Module_Thick_Alu_X_right - Module_Thick_Alu_X_left) / 2;
+
+ Float_t dxpos = CounterXDistance[modType];
+ Float_t startxpos = CounterXStartPosition[modType];
+ Float_t dypos = CounterYDistance[modType];
+ Float_t startypos = CounterYStartPosition[modType];
+ Float_t dzoff = CounterZDistance[modType];
+ Float_t rotangle = CounterRotationAngle[modType];
+
+ TGeoMedium* boxVolMed = gGeoMan->GetMedium(BoxVolumeMedium);
+ TGeoMedium* noActiveGasVolMed = gGeoMan->GetMedium(NoActivGasMedium);
+
+ TString moduleName = Form("module_%d", modType);
+
+ TGeoBBox* module_box = new TGeoBBox("", dx / 2., dy / 2., dz / 2.);
+ TGeoVolume* module = new TGeoVolume(moduleName, module_box, boxVolMed);
+ module->SetLineColor(kGreen); // set line color for the alu box
+ module->SetTransparency(20); // set transparency for the TOF
+
+ TGeoBBox* gas_box =
+ new TGeoBBox("", (dx - (width_aluxl + width_aluxr)) / 2., (dy - 2 * width_aluy) / 2., (dz - 2 * width_aluz) / 2.);
+ TGeoVolume* gas_box_vol = new TGeoVolume("gas_box", gas_box, noActiveGasVolMed);
+ gas_box_vol->SetLineColor(kBlue); // set line color for the alu box
+ gas_box_vol->SetTransparency(50); // set transparency for the TOF
+ TGeoTranslation* gas_box_trans = new TGeoTranslation("", shift_gas_box, 0., 0.);
+ module->AddNode(gas_box_vol, 0, gas_box_trans);
+
+ for (Int_t j = 0; j < NCounterInModule[modType]; j++) { //loop over counters (modules)
+ //for (Int_t j=0; j< 1; j++){ //loop over counters (modules)
+ Float_t xpos, ypos, zpos;
+ if (0 == modType || 3 == modType || 4 == modType || 5 == modType) { zpos = dzoff *= -1; }
+ else {
+ zpos = CounterZStartPosition[modType] + j * dzoff;
+ }
+ //cout << "counter z position " << zpos << endl;
+ xpos = startxpos + j * dxpos;
+ ypos = startypos + j * dypos;
+
+ TGeoTranslation* counter_trans = new TGeoTranslation("", xpos, ypos, zpos);
+
+ TGeoRotation* counter_rot = new TGeoRotation();
+ counter_rot->RotateY(rotangle);
+ if ( CounterRotationAngleZ[modType] != 0. ) counter_rot->RotateZ(CounterRotationAngleZ[modType]);
+ TGeoCombiTrans* counter_combi_trans = new TGeoCombiTrans(*counter_trans, *counter_rot);
+ gas_box_vol->AddNode(gCounter[cType], j, counter_combi_trans);
+ }
+
+ return module;
+}
+
+
+TGeoVolume* create_tof_pole()
+{
+ // needed materials
+ TGeoMedium* boxVolMed = gGeoMan->GetMedium(BoxVolumeMedium);
+ TGeoMedium* airVolMed = gGeoMan->GetMedium(KeepingVolumeMedium);
+
+ Float_t dx = Pole_Size_X;
+ Float_t dy = Pole_Size_Y;
+ Float_t dz = Pole_Size_Z;
+ Float_t width_alux = Pole_Thick_X;
+ Float_t width_aluy = Pole_Thick_Y;
+ Float_t width_aluz = Pole_Thick_Z;
+
+ TGeoVolume* pole = new TGeoVolumeAssembly("Pole");
+ TGeoBBox* pole_alu_box = new TGeoBBox("", dx / 2., dy / 2., dz / 2.);
+ TGeoVolume* pole_alu_vol = new TGeoVolume("pole_alu", pole_alu_box, boxVolMed);
+ pole_alu_vol->SetLineColor(kGreen); // set line color for the alu box
+ pole_alu_vol->SetTransparency(20); // set transparency for the TOF
+ TGeoTranslation* pole_alu_trans = new TGeoTranslation("", 0., 0., 0.);
+ pole->AddNode(pole_alu_vol, 0, pole_alu_trans);
+
+ Float_t air_dx = dx / 2. - width_alux;
+ Float_t air_dy = dy / 2. - width_aluy;
+ Float_t air_dz = dz / 2. - width_aluz;
+
+ // cout << "My pole." << endl;
+ if (air_dx <= 0.) cout << "ERROR - No air volume in pole X, size: " << air_dx << endl;
+ if (air_dy <= 0.) cout << "ERROR - No air volume in pole Y, size: " << air_dy << endl;
+ if (air_dz <= 0.) cout << "ERROR - No air volume in pole Z, size: " << air_dz << endl;
+
+ if ((air_dx > 0.) && (air_dy > 0.) && (air_dz > 0.)) // crate air volume only, if larger than zero
+ {
+ TGeoBBox* pole_air_box = new TGeoBBox("", air_dx, air_dy, air_dz);
+ // TGeoBBox* pole_air_box = new TGeoBBox("", dx/2.-width_alux, dy/2.-width_aluy, dz/2.-width_aluz);
+ TGeoVolume* pole_air_vol = new TGeoVolume("pole_air", pole_air_box, airVolMed);
+ pole_air_vol->SetLineColor(kYellow); // set line color for the alu box
+ pole_air_vol->SetTransparency(70); // set transparency for the TOF
+ TGeoTranslation* pole_air_trans = new TGeoTranslation("", 0., 0., 0.);
+ pole_alu_vol->AddNode(pole_air_vol, 0, pole_air_trans);
+ }
+ else
+ cout << "Skipping pole_air_vol, no thickness: " << air_dx << " " << air_dy << " " << air_dz << endl;
+
+ return pole;
+}
+
+TGeoVolume* create_tof_bar(Float_t dx, Float_t dy, Float_t dz)
+{
+ // needed materials
+ TGeoMedium* boxVolMed = gGeoMan->GetMedium(BoxVolumeMedium);
+ TGeoMedium* airVolMed = gGeoMan->GetMedium(KeepingVolumeMedium);
+
+ Float_t width_alux = Pole_Thick_X;
+ Float_t width_aluy = Pole_Thick_Y;
+ Float_t width_aluz = Pole_Thick_Z;
+
+ TGeoVolume* bar = new TGeoVolumeAssembly("Bar");
+ TGeoBBox* bar_alu_box = new TGeoBBox("", dx / 2., dy / 2., dz / 2.);
+ TGeoVolume* bar_alu_vol = new TGeoVolume("bar_alu", bar_alu_box, boxVolMed);
+ bar_alu_vol->SetLineColor(kGreen); // set line color for the alu box
+ bar_alu_vol->SetTransparency(20); // set transparency for the TOF
+ TGeoTranslation* bar_alu_trans = new TGeoTranslation("", 0., 0., 0.);
+ bar->AddNode(bar_alu_vol, 0, bar_alu_trans);
+
+ TGeoBBox* bar_air_box = new TGeoBBox("", dx / 2. - width_alux, dy / 2. - width_aluy, dz / 2. - width_aluz);
+ TGeoVolume* bar_air_vol = new TGeoVolume("bar_air", bar_air_box, airVolMed);
+ bar_air_vol->SetLineColor(kYellow); // set line color for the alu box
+ bar_air_vol->SetTransparency(70); // set transparency for the TOF
+ TGeoTranslation* bar_air_trans = new TGeoTranslation("", 0., 0., 0.);
+ bar_alu_vol->AddNode(bar_air_vol, 0, bar_air_trans);
+
+ return bar;
+}
+
+void position_tof_poles(Int_t modType)
+{
+
+ TGeoTranslation* pole_trans = NULL;
+
+ Int_t numPoles = 0;
+ for (Int_t i = 0; i < NumberOfPoles; i++) {
+ if (i < 2) {
+ pole_trans = new TGeoTranslation("", -Pole_Offset + 2.0, 0., Pole_ZPos[i]);
+ gGeoMan->GetVolume(geoVersionStand)->AddNode(gPole, numPoles, pole_trans);
+ numPoles++;
+ }
+ else {
+ Float_t xPos = Pole_Offset + Pole_Size_X / 2. + Pole_Col[i] * DxColl;
+ Float_t zPos = Pole_ZPos[i];
+ pole_trans = new TGeoTranslation("", xPos, 0., zPos);
+ gGeoMan->GetVolume(geoVersionStand)->AddNode(gPole, numPoles, pole_trans);
+ numPoles++;
+
+ pole_trans = new TGeoTranslation("", -xPos, 0., zPos);
+ gGeoMan->GetVolume(geoVersionStand)->AddNode(gPole, numPoles, pole_trans);
+ numPoles++;
+ }
+ cout << " Position Pole " << numPoles << " at z=" << Pole_ZPos[i] << endl;
+ }
+}
+
+void position_tof_bars(Int_t modType)
+{
+
+ TGeoTranslation* bar_trans = NULL;
+
+ Int_t numBars = 0;
+ Int_t i;
+ Float_t xPos;
+ Float_t yPos;
+ Float_t zPos;
+
+ for (i = 0; i < NumberOfBars; i++) {
+
+ xPos = Bar_XPos[i];
+ zPos = Bar_ZPos[i];
+ yPos = Pole_Size_Y / 2. + Bar_Size_Y / 2.;
+
+ bar_trans = new TGeoTranslation("", xPos, yPos, zPos);
+ gGeoMan->GetVolume(geoVersionStand)->AddNode(gBar[i], numBars, bar_trans);
+ numBars++;
+
+ bar_trans = new TGeoTranslation("", xPos, -yPos, zPos);
+ gGeoMan->GetVolume(geoVersionStand)->AddNode(gBar[i], numBars, bar_trans);
+ numBars++;
+
+ bar_trans = new TGeoTranslation("", -xPos, yPos, zPos);
+ gGeoMan->GetVolume(geoVersionStand)->AddNode(gBar[i], numBars, bar_trans);
+ numBars++;
+
+ bar_trans = new TGeoTranslation("", -xPos, -yPos, zPos);
+ gGeoMan->GetVolume(geoVersionStand)->AddNode(gBar[i], numBars, bar_trans);
+ numBars++;
+ }
+ cout << " Position Bar " << numBars << " at z=" << Bar_ZPos[i] << endl;
+
+ // horizontal frame bars
+ i = NumberOfBars;
+ NumberOfBars++;
+ // no bar
+ // gBar[i]=create_tof_bar(2.*xPos+Pole_Size_X,Bar_Size_Y,Bar_Size_Y);
+
+ zPos = Pole_ZPos[0] + Pole_Size_Z / 2.;
+ bar_trans = new TGeoTranslation("", 0., yPos, zPos);
+ gGeoMan->GetVolume(geoVersionStand)->AddNode(gBar[i], numBars, bar_trans);
+ numBars++;
+
+ bar_trans = new TGeoTranslation("", 0., -yPos, zPos);
+ gGeoMan->GetVolume(geoVersionStand)->AddNode(gBar[i], numBars, bar_trans);
+ numBars++;
+}
+
+void position_inner_tof_modules(Int_t modNType)
+{
+ TGeoTranslation* module_trans = NULL;
+
+ // Int_t numModules=(Int_t)( (Inner_Module_Last_Y_Position-Inner_Module_First_Y_Position)/Module_Size_Y[modType])+1;
+ Float_t yPos = Inner_Module_First_Y_Position;
+ Int_t ii = 0;
+ Float_t xPos = Inner_Module_X_Offset;
+ Float_t zPos = Wall_Z_Position;
+
+ Pole_ZPos[NumberOfPoles] = zPos;
+ Pole_Col[NumberOfPoles] = 0;
+ NumberOfPoles++;
+
+ Float_t DzPos = 0.;
+ for (Int_t j = 0; j < modNType; j++) {
+ if (Module_Size_Z[j] > DzPos) { DzPos = Module_Size_Z[j]; }
+ }
+ Pole_ZPos[NumberOfPoles] = zPos + DzPos;
+ Pole_Col[NumberOfPoles] = 0;
+ NumberOfPoles++;
+
+ // Mar2019 setup
+ Int_t modNum[4] = {4 * 0};
+ const Int_t NModules = 8;
+ xPos = 0.;
+ yPos = 0.;
+ zPos = TOF_Z_Front;
+ const Int_t ModType[NModules] = {0, 0, 0, 0, 0, 0, 2, 2};
+ const Double_t ModDx[NModules] = {0., 0., 0., 0., 0., 0., 0., 0.};
+ //const Double_t ModDx[NModules]= { 1.5, 0., -1.5, 49.8, 55.8};
+ const Double_t ModDy[NModules] = {50., 0., -50.0, 27., -27.0, 0., 37.5, -37.5};
+ const Double_t ModDz[NModules] = {0., 0, 0, 20., 20., 92., 72., 72};
+ const Double_t ModAng[NModules] = {0., 0., 0., 0., 0., 0., 0., 0.};
+ TGeoRotation* module_rot = NULL;
+ TGeoCombiTrans* module_combi_trans = NULL;
+
+ /*
+ for (Int_t iMod = 0; iMod < NModules; iMod++) {
+ module_trans = new TGeoTranslation("", xPos + ModDx[iMod], yPos + ModDy[iMod], zPos + ModDz[iMod]);
+ module_rot = new TGeoRotation();
+ module_rot->RotateZ(ModAng[iMod]);
+ module_combi_trans = new TGeoCombiTrans(*module_trans, *module_rot);
+ if (iMod < 5) { gGeoMan->GetVolume(geoVersionStand)->AddNode(gModules[0], modNum, module_combi_trans); }
+ else {
+ gGeoMan->GetVolume(geoVersionStand)->AddNode(gModules[2], modNum, module_combi_trans);
+ }
+ modNum++;
+ }
+*/
+
+ for (Int_t iMod = 0; iMod < NModules; iMod++) {
+ module_trans = new TGeoTranslation("", xPos + ModDx[iMod], yPos + ModDy[iMod], zPos + ModDz[iMod]);
+ module_rot = new TGeoRotation();
+ module_rot->RotateZ(ModAng[iMod]);
+ module_combi_trans = new TGeoCombiTrans(*module_trans, *module_rot);
+ gGeoMan->GetVolume(geoVersionStand)->AddNode(gModules[ModType[iMod]], modNum[ModType[iMod]], module_combi_trans);
+ cout << "Placed Module " << modNum[ModType[iMod]] << ", Type " << ModType[iMod] << endl;
+ modNum[ModType[iMod]]++;
+ }
+
+ /*
+ module_trans = new TGeoTranslation("", xPos, 0, zPos+16.5);
+ gGeoMan->GetVolume(geoVersionStand)->AddNode(gModules[modType], modNum, module_trans);
+ modNum++;
+
+ // module_trans = new TGeoTranslation("", xPos, 49+3, zPos);
+ module_trans = new TGeoTranslation("", xPos, 0, zPos+16.5+17.5);
+ gGeoMan->GetVolume(geoVersionStand)->AddNode(gModules[modType], modNum, module_trans);
+ modNum++;
+
+ // module_trans = new TGeoTranslation("", xPos,-26, zPos+Module_Size_Z[modType]);
+ module_trans = new TGeoTranslation("", xPos, -49.8, zPos);
+ gGeoMan->GetVolume(geoVersionStand)->AddNode(gModules[modType], modNum, module_trans);
+ modNum++;
+
+ // module_trans = new TGeoTranslation("", xPos, 26, zPos+Module_Size_Z[modType]);
+ module_trans = new TGeoTranslation("", xPos, -49.8, zPos+16.5);
+ gGeoMan->GetVolume(geoVersionStand)->AddNode(gModules[modType], modNum, module_trans);
+ modNum++;
+ */
+}
+
+
+void position_Dia(Int_t modNType)
+{
+ TGeoTranslation* module_trans = NULL;
+ TGeoRotation* module_rot = new TGeoRotation();
+ module_rot->RotateZ(Dia_rotate_Z);
+ TGeoCombiTrans* module_combi_trans = NULL;
+
+ // Int_t numModules=(Int_t)( (Inner_Module_Last_Y_Position-Inner_Module_First_Y_Position)/Module_Size_Y[modType])+1;
+ Float_t yPos = Dia_First_Y_Position;
+ Int_t ii = 0;
+ Float_t xPos = Dia_X_Offset;
+ Float_t zPos = Dia_Z_Position;
+
+ Int_t modNum = 0;
+ for (Int_t j = 0; j < modNType; j++) {
+ Int_t modType = Dia_Types[j];
+ for (Int_t i = 0; i < Dia_Number[j]; i++) {
+ ii++;
+ module_trans = new TGeoTranslation("", xPos, yPos, zPos);
+ module_combi_trans = new TGeoCombiTrans(*module_trans, *module_rot);
+ gGeoMan->GetVolume(geoVersionStand)->AddNode(gModules[modType], modNum, module_combi_trans);
+ modNum++;
+ }
+ }
+}
+
+void position_Star2(Int_t modNType)
+{
+ TGeoTranslation* module_trans = NULL;
+ TGeoCombiTrans* module_combi_trans = NULL;
+ TGeoRotation* module_rot = NULL;
+ Float_t yPos = Star2_First_Y_Position;
+ Float_t zPos = Star2_First_Z_Position;
+ Int_t ii = 0;
+
+ Int_t modNum = 0;
+ for (Int_t j = 0; j < modNType; j++) {
+ Int_t modType = Star2_Types[j];
+ Float_t xPos = Star2_X_Offset[j];
+ module_rot = new TGeoRotation();
+ module_rot->RotateZ(Star2_rotate_Z[j]);
+ for (Int_t i = 0; i < Star2_Number[j]; i++) {
+ ii++;
+ module_trans = new TGeoTranslation("", xPos, yPos, zPos);
+ module_combi_trans = new TGeoCombiTrans(*module_trans, *module_rot);
+ gGeoMan->GetVolume(geoVersionStand)->AddNode(gModules[modType], modNum, module_combi_trans);
+ modNum++;
+ yPos += Star2_Delta_Y_Position;
+ zPos += Star2_Delta_Z_Position;
+ }
+ }
+}
+
+void position_Buc(Int_t modNType)
+{
+ TGeoTranslation* module_trans = NULL;
+ TGeoRotation* module_rot = new TGeoRotation();
+ module_rot->RotateZ(Buc_rotate_Z);
+ module_rot->RotateY(Buc_rotate_Y);
+ TGeoCombiTrans* module_combi_trans = NULL;
+
+ Float_t yPos = Buc_First_Y_Position;
+ Float_t zPos = Buc_First_Z_Position;
+ Int_t ii = 0;
+
+ Int_t modNum = 0;
+ for (Int_t j = 0; j < modNType; j++) {
+ Int_t modType = Buc_Types[j];
+ Float_t xPos = Buc_X_Offset[j];
+ for (Int_t i = 0; i < Buc_Number[j]; i++) {
+ ii++;
+ module_trans = new TGeoTranslation("", xPos, yPos, zPos);
+ module_combi_trans = new TGeoCombiTrans(*module_trans, *module_rot);
+ gGeoMan->GetVolume(geoVersionStand)->AddNode(gModules[modType], modNum, module_combi_trans);
+ modNum++;
+ yPos += Buc_Delta_Y_Position;
+ zPos += Buc_Delta_Z_Position;
+ }
+ }
+}
+
+void position_cer_modules(Int_t modNType)
+{
+ Int_t ii = 0;
+ Int_t modNum = 0;
+ for (Int_t j = 1; j < modNType; j++) {
+ Int_t modType = Cer_Types[j];
+ Float_t xPos = Cer_X_Position[j];
+ Float_t yPos = Cer_Y_Position[j];
+ Float_t zPos = Cer_Z_Position[j];
+ TGeoTranslation* module_trans = NULL;
+ TGeoRotation* module_rot = new TGeoRotation(Form("Cer%d", j), Cer_rotate_Z[j], -MeanTheta, 0.);
+ // module_rot->RotateZ(Cer_rotate_Z[j]);
+ TGeoCombiTrans* module_combi_trans = NULL;
+
+ for (Int_t i = 0; i < Cer_Number[j]; i++) {
+ ii++;
+ cout << "Position Ceramic Module " << i << " of " << Cer_Number[j] << " Type " << modType << " at X = " << xPos
+ << ", Y = " << yPos << ", Z = " << zPos << endl;
+ // Front staggered module (Top if pair), top
+ module_trans = new TGeoTranslation("", xPos, yPos, zPos);
+ module_combi_trans = new TGeoCombiTrans(*module_trans, *module_rot);
+ gGeoMan->GetVolume(geoVersionStand)->AddNode(gModules[modType], modNum, module_combi_trans);
+ // modNum++;
+ }
+ }
+}
+
+void position_Testbox_MRPC4(Int_t modNType)
+{
+ TGeoTranslation* module_trans = NULL;
+ TGeoRotation* module_rot = new TGeoRotation();
+ module_rot->RotateZ(Testbox_MRPC4_rotate_Z);
+ TGeoCombiTrans* module_combi_trans = NULL;
+
+ // Int_t numModules=(Int_t)( (Inner_Module_Last_Y_Position-Inner_Module_First_Y_Position)/Module_Size_Y[modType])+1;
+ Float_t yPos = Testbox_MRPC4_First_Y_Position;
+ Int_t ii = 0;
+ Float_t xPos = Testbox_MRPC4_X_Offset;
+ Float_t zPos = Testbox_MRPC4_Z_Position;
+
+ for (Int_t j = 0; j < modNType; j++) {
+ Int_t modType = Testbox_MRPC4_Types[j];
+ Int_t modNum = 0;
+ for (Int_t i = 0; i < Testbox_MRPC4_Number[j]; i++) {
+ ii++;
+ module_trans = new TGeoTranslation("", xPos, yPos, zPos);
+ module_combi_trans = new TGeoCombiTrans(*module_trans, *module_rot);
+ gGeoMan->GetVolume(geoVersionStand)->AddNode(gModules[modType], modNum, module_combi_trans);
+ modNum++;
+ }
+ }
+}
+
+void position_side_tof_modules(Int_t modNType)
+{
+ TGeoTranslation* module_trans = NULL;
+ TGeoRotation* module_rot = new TGeoRotation();
+ module_rot->RotateZ(180.);
+ TGeoCombiTrans* module_combi_trans = NULL;
+
+ // Int_t numModules=(Int_t)( (Inner_Module_Last_Y_Position-Inner_Module_First_Y_Position)/Module_Size_Y[modType])+1;
+ Float_t yPos = 0.; //Inner_Module_First_Y_Position;
+ Int_t ii = 0;
+ for (Int_t j = 0; j < modNType; j++) {
+ Int_t modType = InnerSide_Module_Types[j];
+ Int_t modNum = 0;
+ for (Int_t i = 0; i < InnerSide_Module_Number[j]; i++) {
+ ii++;
+ cout << "InnerSide ii " << ii << " Last " << Last_Size_Y << "," << Last_Over_Y << endl;
+ Float_t DeltaY = Module_Size_Y[modType] + Last_Size_Y - 2. * (Module_Over_Y[modType] + Last_Over_Y);
+ if (ii > 1) { yPos += DeltaY; }
+ Last_Size_Y = Module_Size_Y[modType];
+ Last_Over_Y = Module_Over_Y[modType];
+ Float_t xPos = InnerSide_Module_X_Offset;
+ Float_t zPos = Wall_Z_Position;
+ cout << "Position InnerSide Module " << i << " of " << InnerSide_Module_Number[j] << " Type " << modType
+ << " at Y = " << yPos << " Ysize = " << Module_Size_Y[modType] << " DeltaY = " << DeltaY << endl;
+
+ module_trans = new TGeoTranslation("", xPos, yPos, zPos);
+ gGeoMan->GetVolume(geoVersionStand)->AddNode(gModules[modType], modNum, module_trans);
+ modNum++;
+
+ module_trans = new TGeoTranslation("", -xPos, yPos, zPos);
+ module_combi_trans = new TGeoCombiTrans(*module_trans, *module_rot);
+ gGeoMan->GetVolume(geoVersionStand)->AddNode(gModules[modType], modNum, module_combi_trans);
+ modNum++;
+
+ if (ii > 1) {
+ module_trans = new TGeoTranslation("", xPos, -yPos, zPos);
+ gGeoMan->GetVolume(geoVersionStand)->AddNode(gModules[modType], modNum, module_trans);
+ modNum++;
+
+ module_trans = new TGeoTranslation("", -xPos, -yPos, zPos);
+ module_combi_trans = new TGeoCombiTrans(*module_trans, *module_rot);
+ gGeoMan->GetVolume(geoVersionStand)->AddNode(gModules[modType], modNum, module_combi_trans);
+ modNum++;
+
+ module_trans = new TGeoTranslation("", xPos, yPos - DeltaY / 2, zPos + Module_Size_Z[modType]);
+ gGeoMan->GetVolume(geoVersionStand)->AddNode(gModules[modType], modNum, module_trans);
+ modNum++;
+
+ module_trans = new TGeoTranslation("", -xPos, yPos - DeltaY / 2, zPos + Module_Size_Z[modType]);
+ module_combi_trans = new TGeoCombiTrans(*module_trans, *module_rot);
+ gGeoMan->GetVolume(geoVersionStand)->AddNode(gModules[modType], modNum, module_combi_trans);
+ modNum++;
+
+ module_trans = new TGeoTranslation("", xPos, -(yPos - DeltaY / 2), zPos + Module_Size_Z[modType]);
+ gGeoMan->GetVolume(geoVersionStand)->AddNode(gModules[modType], modNum, module_trans);
+ modNum++;
+
+ module_trans = new TGeoTranslation("", -xPos, -(yPos - DeltaY / 2), zPos + Module_Size_Z[modType]);
+ module_combi_trans = new TGeoCombiTrans(*module_trans, *module_rot);
+ gGeoMan->GetVolume(geoVersionStand)->AddNode(gModules[modType], modNum, module_combi_trans);
+ modNum++;
+ }
+ }
+ }
+}
+
+void position_outer_tof_modules(Int_t nCol) //modType, Int_t col1, Int_t col2)
+{
+ TGeoTranslation* module_trans = NULL;
+ TGeoRotation* module_rot = new TGeoRotation();
+ module_rot->RotateZ(180.);
+ TGeoCombiTrans* module_combi_trans = NULL;
+
+ // Int_t numModules=(Int_t)( (Outer_Module_Last_Y_Position-Outer_Module_First_Y_Position)/Module_Size_Y[modType])+1;
+
+ Int_t modNum[NofModuleTypes];
+ for (Int_t k = 0; k < NofModuleTypes; k++) {
+ modNum[k] = 0;
+ }
+
+ Float_t zPos = Wall_Z_Position;
+ for (Int_t j = 0; j < nCol; j++) {
+ Float_t xPos = Outer_Module_X_Offset + ((j + 1) * DxColl);
+ Last_Size_Y = 0.;
+ Last_Over_Y = 0.;
+ Float_t yPos = 0.;
+ Int_t ii = 0;
+ Float_t DzPos = 0.;
+ for (Int_t k = 0; k < Outer_Module_NTypes; k++) {
+ Int_t modType = Outer_Module_Types[k][j];
+ if (Module_Size_Z[modType] > DzPos) {
+ if (Outer_Module_Number[k][j] > 0) { DzPos = Module_Size_Z[modType]; }
+ }
+ }
+
+ zPos -= 2. * DzPos; //((j+1)*2*Module_Size_Z[modType]);
+
+ Pole_ZPos[NumberOfPoles] = zPos;
+ Pole_Col[NumberOfPoles] = j + 1;
+ NumberOfPoles++;
+ Pole_ZPos[NumberOfPoles] = zPos + DzPos;
+ Pole_Col[NumberOfPoles] = j + 1;
+ NumberOfPoles++;
+ //if (j+1==nCol) {
+ if (1) {
+ Pole_ZPos[NumberOfPoles] = Pole_ZPos[0];
+ Pole_Col[NumberOfPoles] = j + 1;
+ NumberOfPoles++;
+
+ Bar_Size_Z = Pole_ZPos[0] - zPos;
+ gBar[NumberOfBars] = create_tof_bar(Bar_Size_X, Bar_Size_Y, Bar_Size_Z);
+ Bar_ZPos[NumberOfBars] = zPos + Bar_Size_Z / 2. - Pole_Size_Z / 2.;
+ Bar_XPos[NumberOfBars] = xPos + Pole_Offset;
+ NumberOfBars++;
+ }
+
+ for (Int_t k = 0; k < Outer_Module_NTypes; k++) {
+ Int_t modType = Outer_Module_Types[k][j];
+ Int_t numModules = Outer_Module_Number[k][j];
+
+ cout << " Outer: position " << numModules << " of type " << modType << " in col " << j << " at z = " << zPos
+ << ", DzPos = " << DzPos << endl;
+ for (Int_t i = 0; i < numModules; i++) {
+ ii++;
+ cout << "Outer ii " << ii << " Last " << Last_Size_Y << "," << Last_Over_Y << endl;
+ Float_t DeltaY = Module_Size_Y[modType] + Last_Size_Y - 2. * (Module_Over_Y[modType] + Last_Over_Y);
+ if (ii > 1) { yPos += DeltaY; }
+ Last_Size_Y = Module_Size_Y[modType];
+ Last_Over_Y = Module_Over_Y[modType];
+ cout << "Position Outer Module " << i << " of " << Outer_Module_Number[k][j] << " Type " << modType << "(#"
+ << modNum[modType] << ") "
+ << " at Y = " << yPos << " Ysize = " << Module_Size_Y[modType] << " DeltaY = " << DeltaY << endl;
+
+ module_trans = new TGeoTranslation("", xPos, yPos, zPos);
+ gGeoMan->GetVolume(geoVersionStand)->AddNode(gModules[modType], modNum[modType], module_trans);
+ modNum[modType]++;
+
+ module_trans = new TGeoTranslation("", -xPos, yPos, zPos);
+ module_combi_trans = new TGeoCombiTrans(*module_trans, *module_rot);
+ gGeoMan->GetVolume(geoVersionStand)->AddNode(gModules[modType], modNum[modType], module_combi_trans);
+ modNum[modType]++;
+
+ if (ii > 1) {
+ module_trans = new TGeoTranslation("", xPos, -yPos, zPos);
+ gGeoMan->GetVolume(geoVersionStand)->AddNode(gModules[modType], modNum[modType], module_trans);
+ modNum[modType]++;
+ module_trans = new TGeoTranslation("", -xPos, -yPos, zPos);
+ module_combi_trans = new TGeoCombiTrans(*module_trans, *module_rot);
+ gGeoMan->GetVolume(geoVersionStand)->AddNode(gModules[modType], modNum[modType], module_combi_trans);
+ modNum[modType]++;
+
+ // second layer
+ module_trans = new TGeoTranslation("", xPos, yPos - DeltaY / 2., zPos + DzPos);
+ gGeoMan->GetVolume(geoVersionStand)->AddNode(gModules[modType], modNum[modType], module_trans);
+ modNum[modType]++;
+ module_trans = new TGeoTranslation("", -xPos, yPos - DeltaY / 2., zPos + DzPos);
+ module_combi_trans = new TGeoCombiTrans(*module_trans, *module_rot);
+ gGeoMan->GetVolume(geoVersionStand)->AddNode(gModules[modType], modNum[modType], module_combi_trans);
+ modNum[modType]++;
+
+ module_trans = new TGeoTranslation("", xPos, -(yPos - DeltaY / 2.), zPos + DzPos);
+ gGeoMan->GetVolume(geoVersionStand)->AddNode(gModules[modType], modNum[modType], module_trans);
+ modNum[modType]++;
+ module_trans = new TGeoTranslation("", -xPos, -(yPos - DeltaY / 2.), zPos + DzPos);
+ module_combi_trans = new TGeoCombiTrans(*module_trans, *module_rot);
+ gGeoMan->GetVolume(geoVersionStand)->AddNode(gModules[modType], modNum[modType], module_combi_trans);
+ modNum[modType]++;
+ }
+ }
+ }
+ }
+}
+
+
+void dump_info_file()
+{
+ TDatime datetime; // used to get timestamp
+
+ printf("writing info file: %s\n", FileNameInfo.Data());
+
+ FILE* ifile;
+ ifile = fopen(FileNameInfo.Data(), "w");
+
+ if (ifile == NULL) {
+ printf("error opening %s\n", FileNameInfo.Data());
+ exit(1);
+ }
+
+ fprintf(ifile, "#\n## %s information file\n#\n\n", geoVersion.Data());
+
+ fprintf(ifile, "# created %d\n\n", datetime.GetDate());
+
+ fprintf(ifile, "# TOF setup\n");
+ if (TOF_Z_Front == 450) fprintf(ifile, "SIS 100 hadron setup\n");
+ if (TOF_Z_Front == 600) fprintf(ifile, "SIS 100 electron\n");
+ if (TOF_Z_Front == 650) fprintf(ifile, "SIS 100 muon\n");
+ if (TOF_Z_Front == 880) fprintf(ifile, "SIS 300 electron\n");
+ if (TOF_Z_Front == 1020) fprintf(ifile, "SIS 300 muon\n");
+ fprintf(ifile, "\n");
+
+ const Float_t TOF_Z_Back = Wall_Z_Position + 1.5 * Module_Size_Z[0]; // back of TOF wall
+
+ fprintf(ifile, "# envelope\n");
+ // Show extension of TRD
+ fprintf(ifile, "%7.2f cm start of TOF (z)\n", TOF_Z_Front);
+ fprintf(ifile, "%7.2f cm end of TOF (z)\n", TOF_Z_Back);
+ fprintf(ifile, "\n");
+
+ // Layer thickness
+ fprintf(ifile, "# central tower position\n");
+ fprintf(ifile, "%7.2f cm center of staggered, front RPC cell at x=0\n", Wall_Z_Position);
+ fprintf(ifile, "\n");
+
+ fclose(ifile);
+}
diff --git a/tof/tof_v24d_mcbm.geo.info b/tof/tof_v24d_mcbm.geo.info
new file mode 100644
index 0000000000000000000000000000000000000000..bac4e71b26062798f2dc4cfb06c556c134f34349
--- /dev/null
+++ b/tof/tof_v24d_mcbm.geo.info
@@ -0,0 +1,15 @@
+#
+## tof_v24d_mcbm information file
+#
+
+# created 20240617
+
+# TOF setup
+
+# envelope
+ 0.00 cm start of TOF (z)
+ 416.50 cm end of TOF (z)
+
+# central tower position
+ 400.00 cm center of staggered, front RPC cell at x=0
+
diff --git a/tof/tof_v24d_mcbm.geo.root b/tof/tof_v24d_mcbm.geo.root
new file mode 100644
index 0000000000000000000000000000000000000000..19f45d24999b16886a747e96460866c6cb74dac7
Binary files /dev/null and b/tof/tof_v24d_mcbm.geo.root differ