Commit 4dadea0e authored by Mehulkumar Shiroya's avatar Mehulkumar Shiroya Committed by Florian Uhlig
Browse files

STS geometry version v21[h-i]

STS v21h: The geometry has the target positioned at -4 cm. It can be used with the beampipe 40mm diameter upstream side
and 104mm diameter downstream side. It has a beampipe flange on the back-side of the STS wall.
In addition, the geometry has a sensor thickness 320 um which is similar thickness of the real silicon sensors purchased from the Hamamatsu Photonics
for the use in the real experiment.
Furthermore,the mico-cable is defined as a single volume attached to the silicon sensors. Micro-cable thickness (320 um) is choosen and
the material Manganese is taken based on the calculation done by taking the current microcable design, thickness and its material.

STS v21i: The geometry has the target positioned at -44 cm from the center of the magnet. It can be used with the beampipe 40mm diameter upstream side
and 104mm diameter downstream side. It doesn't have a beam-pipe flange on the back-side of the wall.
In addition, the geometry has a sensor thickness 320 um which is similar thickness of the real silicon sensors purchased from the Hamamatsu >
for the use in the real experiment.
Furthermore,the mico-cable is defined as a single volume attached to the silicon sensors. Micro-cable thickness (320 um) is choosen and
the material Manganese is taken based on the calculation done by taking the current microcable design, thickness and its material.
parent b606f002
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment