1. 13 Dec, 2021 27 commits
  2. 24 Nov, 2021 1 commit
    • Mehulkumar Shiroya's avatar
      STS Geometry version v21[h-i] · d72ed827
      Mehulkumar Shiroya authored
      STS v21h: The geometry has the target positioned at -4 cm. It can be used with the beampipe 40mm diameter upstream side
                and 104mm diameter downstream side. It has a beampipe flange on the back-side of the STS wall.
      
                In addition, the geometry has a sensor thickness 320 um which is similar thickness of the real silicon sensors purchased from the Hamamatsu Photonics
                for the use in the real experiment.
      
                Furthermore,the mico-cable is defined as a single volume attached to the silicon sensors. Micro-cable thickness (320 um) is choosen and
                the material Manganese is taken based on the calculation done based on the current microcable design, thickness and its material.
                The material is defined as STS_Manganese in the media.geo file.
      
      STS v21i: The geometry has the target positioned at -44 cm from the center of the magnet. It can be used with the beampipe 40mm diameter upstream side
                and 104mm diameter downstream side....
      d72ed827
  3. 19 Nov, 2021 2 commits
    • Mehulkumar Shiroya's avatar
      Corrects STS v21e position error · 82d5b294
      Mehulkumar Shiroya authored
      Transformation between local sts origin (last station) and global origin (center of magnet) is now 59.5. Front face of sts to intended position of target (-44cm) is now 1.6 cm.
      82d5b294
    • Mehulkumar Shiroya's avatar
      STS v21[f,g] geometries · 6d8968cc
      Mehulkumar Shiroya authored
      v21f: STS geometry is similar to the version v21b. The target position considered from -4 cm.
      The geometry can be used with the beampipe with diameter 40 mm upstream side and 104 mm downstream side.
      The geometry has beampipe flange on the back-side of the wall.
      
      v21g: STS geometry is similar to the version v21e. The target position is at -44 cm considering global origin
      from the center of magnet. The STS local coordinate is from the last station.
      
      In both geometry, the STS box and the beam pipe flange is made of Carbon fiber: The material has 70% carbon fiber with
      density 1.75 g/cm3 and epoxy resin (30%) with density 1.2 g/cm3. The material is defined in media.geo file as
      STS_CarbonFiber_21.
      6d8968cc
  4. 18 Nov, 2021 1 commit
  5. 17 Nov, 2021 1 commit
  6. 16 Nov, 2021 1 commit
  7. 15 Nov, 2021 1 commit
  8. 12 Nov, 2021 1 commit
  9. 11 Nov, 2021 2 commits
  10. 10 Nov, 2021 1 commit
  11. 05 Nov, 2021 2 commits