Commit 67945cfc authored by Eoin Clerkin's avatar Eoin Clerkin Committed by Eoin Clerkin
Browse files

12AGeV|3.3AGeV with 100%|60% magnet

pipe_v22a is designed to be compatiable with psd_v22a
has a 12AGeV beam with 100% magnetic field.

pipe_v22b is compatiable with psd_v22b whcih is a 3.3AGeV
beam with 60% magnetic field.

This  geometry combines the work of several beampipes.
For the upstream section a window section and STS section.
A sts flange from sts_v21f geometry. A taget box from sts_v21h geometry.
The wide conical section, bellows, are from beampipe v21e and v21f geometries.

The downstream section is set by specifying the position of the psd.
parent 9cff7a90
...@@ -79,6 +79,9 @@ BP_carbonfiber 4 12.011 1.0079 35.453 15.999 6.0 1.0 17. 8.0 1.5 0.892 ...@@ -79,6 +79,9 @@ BP_carbonfiber 4 12.011 1.0079 35.453 15.999 6.0 1.0 17. 8.0 1.5 0.892
0 1 20. .001 0 1 20. .001
0 0
BP_HexPly 4 12.011 1.0079 35.453 15.999 6.0 1.0 17. 8.0 1.5 0.8926 0.0192 0.0271 0.0611
0 1 20. .001
0
// --------------------------------------------------------------------------- // ---------------------------------------------------------------------------
......
...@@ -170,7 +170,11 @@ deltaphi="TWOPI" ...@@ -170,7 +170,11 @@ deltaphi="TWOPI"
/> />
--> -->
<!-- According to ED-1159370-D-001-IO, the beam pipe has a concical length of 707.99 mm and a tubular lenght of 282.01 which comes up to upstream face of the outer flange. There is an additional 21.81 mm to the most upstream point on the window. This makes 1011.81 for a total length. Considering however that we are using a torsoidal window with radii 1 amd 2 of 62.5409 and 82.5409. Since the conical section should start at the semi circle then 6.25409 cm must be removed leaving 101.81-6.25409 = 955.5591 mm --> <!-- According to ED-1159370-D-001-IO,
the beam pipe has a concical length of 707.99 mm and a tubular lenght of 282.01 which comes up to upstream face of the outer flange.
There is an additional 21.81 mm to the most upstream point on the window. This makes 1011.81 for a total length. Considering however
that we are using a torsoidal window with radii 1 amd 2 of 62.5409 and 82.5409. Since the conical section should start at the
semi circle then 6.25409 cm must be removed leaving 101.81-6.25409 = 955.5591 mm -->
<cone <cone
name="cone4" name="cone4"
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment